Sprungmarken

Servicenavigation

Hauptnavigation

Sie sind hier:

Hauptinhalt

M.Sc. Mustafa Mamduh Mustafa Awd

M.Sc. Mustafa Mamduh Mustafa Awd Foto von M.Sc. Mustafa Mamduh Mustafa Awd

Telefon
(+49)231 755-8423

Fax
(+49)231 755-8029

vCard

Adresse

Raum 2.023

Inhalt

Aufgabenbereiche

  • Ultraschallschwingprüfsysteme (VHCF)
  • Computertomographie (CT)
  • Modellierung und Simulation, Finite-Elemente-Methoden (FEM)
  • Koordination Lehre
  • Academic Advisor (MMT)
  • Koordination Kompetenzfeld Modellierung und Simulation
  •  
  • Übung Vorlesung Fatigue Behaviour (FB, MMT)
  • Übung Vorlesung Measurement Engineering (ME, MMT), LabVIEW

 

Forschung

 

Mitgliedschaften

 

Auszeichnugnen

  • Best Student Paper Award
    FFW 2018, 7th International Conference on Fracture Fatigue and Wear, Ghent, Belgium, 09.-10. July (2018)

Veröffentlichungen

  • 17) Awd, M.; Merghany, M.; Johannsen, J.; Emmelmann, C.; Walther, F.:
    Microstructural damage and fracture mechanisms of selective laser melted AlSi10Mg alloy under cyclic loading.
    Proc. of the 1st European Conference on Structural Integrity of Additively Manufactured Materials (2019) 1-6.

  • 16) Awd, M.; Merghany, M.; Siddique, S.; Walther, F.:
    Simulation-based investigation of statistical fatigue strength of selective laser melted lightweight alloys.
    Sim-Am 2019, Proc. of the 2nd International Conference on Simulation for Additive Manufacturing (2019) 262-273.

  • 15) Biswal, R.; Zhang, X.; Shamir, M.; Al Mamun, A.; Awd, M.; Walther, F.; Syed, A.:
    Interrupted fatigue testing with periodic tomography to monitor porosity defects in wire + arc additive manufactured Ti-6Al-4V.
    Additive Manufacturing 8 (2019) 517-527. https://doi.org/10.1016/j.addma.2019.04.026

  • 14) Awd, M.; Siddique, S.; Johannsen, J.; Emmelmann, C.; Walther, F.:
    Very high-cycle fatigue properties and microstructural damage mechanisms of selective laser melted AlSi10Mg alloy.
    International Journal of Fatigue 124 (2019) 55-69. https://doi.org/10.1016/j.ijfatigue.2019.02.040

  • 13) Syed, A.; Awd, M.; Walther, F.; Zhang, X.:
    Microstructure and mechanical properties of as-built and heat-treated electron beam melted Ti–6Al–4V.
    Materials Science and Technology (2019) 1-8. https://doi.org/10.1080/02670836.2019.1580434

  • 12) Biswal, R.; Zhang, X.; Syed, A.; Awd, M.; Ding, J.; Walther, F.; Williams, S.:
    Criticality of porosity defects on the fatigue performance of wire + arc additive manufactured titanium alloy.
    International Journal of Fatigue 122 (2019) 208-217. https://doi.org/10.1016/j.ijfatigue.2019.01.017

  • 11) Awd, M.; Siddique, S.; Johannsen, J.; Wiegold, T.; Klinge, S.; Emmelmann, C.; Walther, F.:
    Quality assurance of additively manufactured alloys for aerospace industry by non-destructive testing and numerical modeling.
    Proceedings of the 10th International Conference on Non-destructive Testing in Aerospace (2018) 1-10. Publikation als PDF-Datei anschauen.

  • 10) Siddique, S.; Awd, M.; Wiegold, T.; Klinge, S.; Walther, F.:
    Simulation of cyclic deformation behavior of selective laser melted and hybrid-manufactured aluminum alloys using the phase-field method.
    Applied Sciences 8(10), 1948 (2018) 1-18. https://doi.org/10.3390/app8101948

  • 9) Awd, M.; Stern, F.; Kampmann, A.; Kotzem, D.; Tenkamp, J.; Walther, F.:
    Microstructural characterization of the anisotropy and cyclic deformation behavior of selective laser melted AlSi10Mg structures.
    Metals 8(10), 825 (2018) 1-14. https://doi.org/10.3390/met8100825

  • 8) Awd, M.; Siddique, S.; Hajavifard, R.; Walther, F.:
    Comparative study of defect-based and plastic damage-based approaches for fatigue lifetime calculation of selective laser-melted AlSi12.
    FFW 2018, Proc. of the 7th International Conference on Fracture Fatigue and Wear (2018) 297-313. https://doi.org/10.1007/978-981-13-0411-8_27

  • 7) Awd, M.; Johannsen, J.; Siddique, S.; Emmelmann, C.; Walther, F.:
    Qualification of selective laser-melted Al alloys against Fatigue damage by means of measurement and modeling techniques.
    Fatigue 2018, Matec Web of Conferences 165, 02001 (2018) 1-7. https://doi.org/10.1051/matecconf/201816502001

  • 6) Frömel, F.; Awd, M.; Tenkamp, J.; Walther, F.; Boes, J.; Geenen, K.; Röttger, A.; Theisen, W.:
    Untersuchung des Einflusses einer HIP-Nachbehandlung auf den selektiv lasergeschmolzenen (SLM) austenitischen Stahl AISI 316L.
    Werkstoffe und Additive Fertigung - Tagungsband, Hrsg: P. Hoyer, C. Leyens, T. Niendorf, V. Ploshikhin, V. Schulze, G. Witt, ISBN 978-3-88355-418-1 (2018) 190-199.

  • 5) Awd, M.; Tenkamp, J.; Hirtler, M.; Siddique, S.; Bambach, M.; Walther, F.:
    Comparison of microstructure and mechanical properties of Scalmalloy® produced by selective laser melting and laser metal deposition.
    Materials 11, 1 (2018) 1-17. https://doi.org/10.3390/ma11010017

  • 4) Siddique, S.; Awd, M.; Tenkamp, J.; Walther, F.:
    High and very high cycle fatigue failure mechanisms in selective laser melted aluminum alloys.
    Journal of Materials Research 32, 23 (2017) 4296-4304. https://doi.org/10.1557/jmr.2017.314

  • 3) Awd, M.; Siddique, S.; Tenkamp, J.; Walther, F.:
    Freeform characterization of fatigue strength of additively manufactured lightweight alloys through FEM and Monte-Carlo modeling.
    2. Tagung des DVM-AK Additiv gefertigte Bauteile und Strukturen, Hrsg.: H.-A. Richard, DVM e.V., ISSN 2509-8772 (2017) 127-136.

  • 2) Siddique, S.; Awd, M.; Walther, F.:
    Influence of hybridization by selective laser melting on the very high cycle fatigue behavior of aluminium alloys.
    VHCF7, Proc. of the 7th International Conference on Very High Cycle Fatigue, Dresden, ISBN 978-3-00-056960-9 (2017) 229-234.

  • 1) Siddique, S.; Awd, M.; Tenkamp, J.; Walther, F.:
    Development of a stochastic approach for fatigue life prediction of AlSi12 alloy processed by selective laser melting.
    Engineering Failure Analysis 79 (2017) 34-50. https://doi.org/10.1016/j.engfailanal.2017.03.015

Die Auflistung aller Veröffentlichungen ist hier einzusehen.

 

Vorträge

  • 17) Johannsen, J. (V.); Awd, M.; Siddique, S.; Emmelmann, C.; Walther, F.:
    Very High-Cycle Ermüdungseigenschaften und mikrostrukturelle Versagensmechanismen von laserstrahlgeschmolzenem (SLM) AlSi10Mg.
    Werkstoffwoche 2019, Dresden, 18.-20. Sept. (2019).

  • 16) Awd, M. (V.); Merghany, M.; Siddique, S.; Walther, F.:
    Simulation-based investigation of statistical fatigue strength of selective laser melted lightweight alloys.
    SIM-AM19, The Second International Conference on Simulation for Additive Manufacturing, invited talk, Pavia, Italy, 11.-13. Sept. (2019).

  • 15) Awd, M. (V.); Merghany, M.; Johannsen, J.; Emmelmann, C.; Walther, F.:
    Microstructural damage and fracture mechanisms of selective laser melted AlSi10Mg alloy under cyclic loading.
    ESIAM19, The First European Conference on Structural Integrity of Additively Manufactured Materials, Trondheim, Norway, 09.-11. Sept. (2019).

  • 14) Siddique, S.; Awd, M.; Stern, F.; Tenkamp, J. (V.); Walther, F.:
    Effect of microstructure and internal defects on the cyclic deformation and damage behavior in additively (SLM) manufactured Al-Si alloys.
    TMS 2019 Annual Meeting & Exhibition, San Antonio, TX, USA, 10.-14. March (2019).

  • 13) Awd, M. (V.); Siddique, S.; Johannsen, J.; Wiegold, T.; Klinge, S.; Emmelmann, C.; Walther, F.:
    Quality assurance of additively manufactured alloys for aerospace industry by non-destructive testing and numerical modeling.
    The 10th International Conference on Non-destructive Testing in Aerospace, Dresden, Germany, 24.-26. Okt. (2018).

  • 12) Awd, M. (V.); Siddique, S.; Hajavifard, R.; Walther, F.:
    Comparative study of defect-based and plastic damage-based approaches for fatigue lifetime calculation of selective laser-melted AlSi12.
    FFW 2018, 7th International Conference on Fracture Fatigue and Wear, Ghent, Belgium, 09.-10. July (2018).

  • 11) Awd, M. (V.); Tenkamp, J.; Siddique, S.; Walther, F.:
    Additive manufacturing of lightweight metals - the process-property relationship.
    10 Years ICAMS International Symposium, Bochum, 27.-25. Juni (2018).

  • 10) Awd, M. (V.); Johannsen, J.; Siddique, S.; Emmelmann, C.; Walther, F.:
    Qualification of selective laser-melted Al alloys against fatigue damage by means of measurement and modeling techniques.
    Fatigue 2018, 12th International Fatigue Congress, Poitiers, France, 27. May-1. June (2018).

  • 9) Awd, M. (V.); Tenkamp, J.; Siddique, S.; Walther, F.:
    Additive manufacturing of metallic alloys – processes and properties.
    Kolloquium Zukunft Materialien, Hochschule Hamm-Lippstadt, Lippstadt, 23. Mai (2018).

  • 8) Frömel, F (V.).; Awd, M.; Tenkamp, J.; Walther, F.; Boes, J.; Geenen, K.; Röttger, A.; Theisen, W.:
    Untersuchung des Einflusses einer HIP-Nachbehandlung auf den selektiv lasergeschmolzenen (SLM) austenitischen Stahl AISI 316L.
    Werkstoffe und Additive Fertigung, Potsdam, 25.-26. April (2018)

  • 7) Awd, M. (V.); Siddique, S.; Tenkamp, J.; Walther, F.:
    Freeform characterization of fatigue strength of additively manufactured lightweight alloys through FEM and Monte-Carlo modeling.
    2. Tagung des DVM-AK Additiv gefertigte Bauteile und Strukturen, Berlin, 09.-10. Nov. (2017).

  • 6) Siddique, S.; Awd, M.; Kampmann, A.; Tenkamp, J. (V.); Walther, F.:
    Defekt-basierte Charakterisierung des Ermüdungsverhaltens von laseradditiv gefertigten AlSi10Mg- und AlSi12-Legierungen.
    Werkstoffwoche 2017, Dresden, 27.-29. Sept. (2017).

  • 5) Siddique, S. (V.); Awd, M.; Tenkamp, J.; Walther, F.:
    Very high cycle fatigue mechanisms and fatigue life prediction of additive manufactured Al-alloys.
    Hael Mughrabi Honorary Symposium & 28th Colloquium on Fatigue Mechanisms, Erlangen, 19.-21. Juli (2017).

  • 4) Siddique, S. (V.); Awd, M.; Tenkamp, J.; Walther, F.:
    Influence of hybridization by selective laser melting on the very high cycle fatigue behavior of aluminium alloys.
    VHCF7, 7th International Conference on Very High Cycle Fatigue, Dresden, 3.-5. Juli (2017)

  • 3) Tenkamp, J. (V.); Siddique, S.; Awd, M.; Kampmann, A; Walther, F.:
    Experimental investigations on the effect of process-induced material characteristics on the mechanical performance of selective laser melted Al- and Ti-alloys.
    IKM-Seminar, Dresden, 10. Febr. (2017).

  • 2) Siddique, S.; Awd, M.; Tenkamp, J. (V.); Walther, F.:
    Defect-correlated fatigue assessment of selective laser melted Al- and Ti-alloys in HCF- and VHCF-regions.
    International Symposium “Additive Manufacturing-, Dresden, 08.-09. Febr. (2017).

  • 1) Awd, M. (V.); Siddique, S.; Imran, M.; Walther, F.:
    Development of a stochastic approach for fatigue life prediction of AlSi12 alloy processed by selective laser melting.
    MSE 2016, Materials Science and Engineering, Darmstadt, 27.-29. Sept. (2016).

Die Auflistung aller Vorträge ist hier einzusehen.