To content
Faculty of Mechanical Engineering
Research

Publications

2023 - 2024

510) Moritz, J.; Teschke, M.; Marquardt, A.; Stepien, L.; López, E.; Brueckner, F.; Walther, F.; Leyens, C.:
Influence of electron beam powder bed fusion process parameters at constant volumetric energy density on surface topography and microstructural homogeneity of a titanium aluminide alloy.
Advanced Engineering Materials, 2201871 (2023) 1-14. https://doi.org/10.1002/adem.202201871 - Download

509) Sarafraz, Y.; Brink, M.; Baak, N.; Koch, A.; Walther, F.:
Influence of pre-deformation on fatigue life of high strength steels by means of micromagnetic Barkhausen noise.
Materials Testing 65 (5), (2023) 641-651. https://doi.org/10.1515/mt-2022-0425

508) Strodick, S.; Hühn, F. R.; Schmidt, R.; Biermann, D.; Zabel, A.; Walther, F.:
Evolution of the residual stress state in BTA deep drilled components under quasi-static and cyclic loading.
ICRS 11, Proceedings of the 11th International Conference on Residual Stresses, (2023) 1-8.Download

507) Stern, F.; Becker, L.; Tenkamp, J.; Boes, J.; Lentz, J.; Weber, S.; Walther, F.:
Influence of nitrogen content on the corrosion fatigue behavior of additively manufactured AISI 316L stainless steel in chloride solution.
International Journal of Fatigue 172, 107666 (2023) 1-10. https://doi.org/10.1016/j.ijfatigue.2023.107666

506) Gerdes, L.; Franck, P.; Richle, S.; Barandun, G.A.; Walther, F.:
Fatigue assessment of carbon fiber-reinforced polyurethane with regard to crack initiation and propagation.
Engineering 4 (2), (2023) 1009-1022. https://doi.org/10.3390/eng4020060 - Download

505) Clausius, B.; Wegner, N.; Jeyavalan, S.; Hartweg, H.; Walther, F.; Maier, P.:
Influence of corrosion extent on residual tensile strength and corrosion fatigue properties of an Mg-Y-Nd alloy characterized by µCT.
TMS 2023 - Annual Meeting & Exhibition, Magnesium Technology - The Minerals, Metals & Materials Series, (2023) 95-98. https://doi.org/10.1007/978-3-031-22645-8_21

504) Mrzljak, S.; Zanghellini, B.; Gerdes, L.; Helwing, R.; Schuller, R.; Sinn, G.; Lichtenegger, H.; Walther, F.; Rennhofer, H.:
Effect of carbon nanofibre orientation on fatigue properties of carbon fibre-reinforced polymers.
Journal of Composite Materials 57 (6), (2023) 1149-1164. https://doi.org/10.1177/00219983221150496 - Download

503) Cui, C.; Stern, F.; Ellendt, N.; Uhlenwinkel, V.; Steinbacher, M.; Tenkamp, J.; Walther, F.; Fechte-Heinen, R.:
Gas atomization of duplex stainless steel powder for laser powder bed fusion.
Materials 16 (1), 435 (2023) 1-19. https://doi.org/10.3390/ma16010435 - Download

502) Kotzem, D.; Arold, T.; Bleicher, K.; Raveendran, R.; Niendorf, T.; Walther, F.:
Ti6Al4V lattice structures manufactured by electron beam powder bed fusion - Microstructural and mechanical characterization based on advanced in situ techniques.
Journal of Materials Research and Technology 22, (2023) 2111-2130. https://doi.org/10.1016/j.jmrt.2022.12.075 - Download

 

2021 - 2022

501) Lingnau, L. A.; Lücker, L.; Walther, F.:
Resistometriebasierte Charakterisierung der umform- und ermüdungsinduzierten Schädigung im Einsatzstahl 16MnCrS5.
Werkstoffprüfung 2022 - Werkstoffe und Bauteile auf dem Prüfstand, Hrsg.: M. Zimmermann, ISBN 978-3-88355-430-3 (2022) 406-411.

500) Franck, P.; Scholz, R.; Walther, F.:
Entwicklung eines mobilen Prüfsystems zur Ermittlung der Kriecheigenschaften von in Laubholz eingeklebten Gewindestangen.
Werkstoffprüfung 2022 - Werkstoffe und Bauteile auf dem Prüfstand, Hrsg.: M. Zimmermann, ISBN 978-3-88355-430-3 (2022) 355-360.

499) Otto, J. L.; Henkel, T.; Kalenborn, A.; Walther, F.:
Charakterisierung des legierungs- und mikrostrukturabhängigen Korrosionsermüdungsverhaltens gelöteter X2CrNi18-9/NiCrSiB-Verbindungen.
Werkstoffprüfung 2022 - Werkstoffe und Bauteile auf dem Prüfstand, Hrsg.: M. Zimmermann, ISBN 978-3-88355-430-3 (2022) 275-280.

498) Donnerbauer, K.; Bill, T.; Starke, P.; Acosta, R.; Boller, C.; Arndt, J.; Heckmann, K.; Sievers, J.; Schopf, T.; Walther, F.:
Charakterisierung des LCF-Ermüdungsverhaltens des in kerntechnischen Komponenten eingesetzten austenitischen Stahls X6CrNiNb18-10.
Werkstoffprüfung 2022 - Werkstoffe und Bauteile auf dem Prüfstand, Hrsg.: M. Zimmermann, ISBN 978-3-88355-430-3 (2022) 269-274.

497) Helwing, R.; Hülsbusch, D.; Walther, F.:
Schädigungsmechanismenbasierte Quantifikation des Laminatrandeffektes in faserverstärkten Kunststoffen unter Ermüdungsbeanspruchung.
Werkstoffprüfung 2022 - Werkstoffe und Bauteile auf dem Prüfstand, Hrsg.: M. Zimmermann, ISBN 978-3-88355-430-3 (2022) 209-215.

496) Stammkötter, S.; Merghany, M.; Tenkamp, J.; Walther, F.:
Qualifikation bruchmechanikbasierter Lebensdauervorhersagen von additiv- und gießtechnisch-gefertigten Al-Si-Mg-Legierungen.
Werkstoffprüfung 2022 - Werkstoffe und Bauteile auf dem Prüfstand, Hrsg.: M. Zimmermann, ISBN 978-3-88355-430-3 (2022) 143-149.

495) Hülsbusch, D.; Mrzljak, S.; Helwing, R.; Gerdes, L.; Walther, F.:
Schädigungsorientierte Charakterisierung des Ermüdungsverhaltens glasfaserverstärkter Kunststoffe vom LCF- bis VHCF-Bereich.
Werkstoffprüfung 2022 - Werkstoffe und Bauteile auf dem Prüfstand, Hrsg.: M. Zimmermann, ISBN 978-3-88355-430-3 (2022) 13-23.

494) Rozo Vasquez, J.; Kanagarajah, H.; Arian, B.; Kersting, L.; Homberg, W.; Trächtler, A.; Walther, F.:
Coupled microscopic and micromagnetic depth-specific analysis of plastic deformation and phase transformation of metastable austenitic steel AISI 304L by flow forming.
Practical Metallography 59 (11), (2022) 660-675. https://doi.org/10.1515/pm-2022-0064

493) Mrzljak, S.; Blickling, P.; Trautmann, M.; Wagner, G.; Walther, F.:
Characterization of fatigue crack initiation and propagation in thermoplastic-based hybrid laminates.
ECCM20, Proceedings of the 20th European Conference on Composite Materials 3, (2022) 862-869.Download

492) Scholz, R.; Walther, F.:
Mechanism-based assessment of cellulose-based biocomposite Cottonid for sustainable construction.
ECCM20, Proceedings of the 20th European Conference on Composite Materials 3, (2022) 616-623.Download

491) Strodick, S.; Schmidt, R.; Brause, L.; Zabel, A.; Biermann, D.; Walther, F.:
Mikromagnetische Charakterisierung der Bohrungsintegrität.
wt Werkstattstechnik online 112, 11/12 (2022) 757-761.

490) Donnerbauer, K.; Acosta, R.; Boller, C.; Bill, T.; Starke, P.; Heckmann, K.; Sievers, J.; Schopf, T.; Walther, F.:
Fatigue damage evaluation of stainless AISI 347 steel by advanced microstructure-sensitive NDT analysis.
Procedia Structural Integrity 42 (2022) 738-744. https://doi.org/10.1016/j.prostr.2022.12.093 - Download

489) Tenkamp, J.; Stammkötter, S.; Walther, F.:
Qualification of uniform fatigue damage tolerance law for additively manufactured and cast Al-Si alloys.
Procedia Structural Integrity 42 (2022) 328-335. https://doi.org/10.1016/j.prostr.2022.12.040 - Download

488) Lücker, L.; Lingnau, L. A.; Walther, F.:
Non-destructive direct current potential drop assessment of forming-induced pre-damage in AISI 5115 steel.
Procedia Structural Integrity 42 (2022) 368-373. https://doi.org/10.1016/j.prostr.2022.12.046 - Download

487) Sarafraz, Y.; Stammkötter, S; Koch, A.; Walther, F.:
Dimension-based failure analysis of formed internal threads in AlSi10Mg cast profiles using coupled DT/NDT testing methods.
Procedia Structural Integrity 42 (2022) 125-132. https://doi.org/10.1016/j.prostr.2022.12.015 - Download

486) Felinks, N.; Krumme, E.; Beer, C.; Hechtle, D.; Sarafraz, Y.; Walther, F.; Biermann, D. :
Influence of core hole diameter on thread quality for a high-performance tapping technology in AlSi10MnMg cast alloys.
Procedia CIRP 115 (2022) 42-47. https://doi.org/10.1016/j.procir.2022.10.047 - Download

485) Mrzljak, S.; Gerdes, L.; Keuntje, J.; Wippo, V.; Jaeschke, P.; Walther, F. :
Assessment of laser cutting parameters and heat-affected zone on microstructure and fatigue behaviour of carbon fibre-reinforced epoxy.
Part E: Journal of Process Mechanical Engineering, (2022) 1-9. https://doi.org/10.1177/09544089221139656 - Download

484) Marx, J.; Tenkamp, J.; Walther, F.; Esen, C.:
Fabrication of rectangular micro-channels by ultrashort pulse ablation using a Bessel beam.
Journal of Laser Micro/Nanoengineering 17 (3), (2022) 1-6. https://doi.org/10.2961/jlmn.2022.03.2003

483) Remalli, N.; Münch, M.; Hasan, M.; Kishore, K. N.; Stern, F.; Baak, N.; Walther, F.; Sambandam, M.; Klapprott, S.; Rajulapati, K. V.; Brandt, R.:
On the low temperature creep controlling mechanism in a high strength spring steel.
Journal of Materials Research and Technology 21, (2022) 2309-2315. https://doi.org/10.1016/j.jmrt.2022.09.131

482) Merghany, M.; Teschke, M.; Stern, F.; Tenkamp, J.; Walther, F. :
Enhanced assessment of the fatigue behavior and damage tolerance of additively manufactured metals and components.
Proceedings in Engineering Mechanics. Hrsg.: da Silva, L.F.M.; Ravi Kumar, D.; Reis Vaz, M.d.F.; Carbas, R.J.C., ISBN 978-3-031-13233-9 (2022) 19-26. https://doi.org/10.1007/978-3-031-13234-6_2

481) Kotzem, D.; Walther, F.:
Mechanical assessment of PBF-EB manufactured IN718 lattice structures.
Proceedings in Engineering Mechanics. Hrsg.: da Silva, L.F.M.; Ravi Kumar, D.; Reis Vaz, M.d.F.; Carbas, R.J.C., ISBN 978-3-031-13233-9 (2022) 3-18. https://doi.org/10.1007/978-3-031-13234-6_1

480) Helwing, R.; Hülsbusch, D.; Walther, F.:
Deep learning method for analysis and segmentation of fatigue damage in X-ray computed tomography data for fiber-reinforced polymers.
Composites Science and Technology 230 (1), 109781 (2022) 1-9. https://doi.org/10.1016/j.compscitech.2022.109781

479) Moritz, J.; Teschke, M.; Marquardt, A.; Heinze, S.; Heckert, M.; Stepien, L.; López, E.; Brueckner, F.; Walther, F.; Leyens, C.:
Influence of two-step heat treatments on microstructure and mechanical properties of a β-solidifying titanium aluminide alloy fabricated via electron beam powder bed fusion.
Advanced Engineering Materials, 2200931 (2022) 1-15. https://doi.org/10.1002/adem.202200931 - Download

478) Moritz, J.; Teschke, M.; Marquardt, A.; Stepien, L.; López, E.; Brueckner, F.; Walther, F.; Leyens, C.:
Locally adapted microstructures in an additively manufactured titanium aluminide alloy through process parameter variation and heat treatment.
Advanced Engineering Materials, 2200917 (2022) 1-11. https://doi.org/10.1002/adem.202200917 - Download

477) Gerdes, L.; Berger, S.; Saelzer, J.; Franck, P.; Helwing, R.; Zabel, A.; Walther, F.:
Application-oriented digital image correlation for the high-speed deformation and fracture analysis of AISI 1045 and Ti6Al4V materials.
Applied Mechanics 3 (4), (2022) 1190-1205. https://doi.org/10.3390/applmech3040068 - Download

476) Tenkamp, J.; Höffgen, A.; Teschke, M.; Kotzem, D.; Walther, F.:
In-vitro-, In-vivo- und In-silico-Qualifizierung von additiv gefertigten Implantaten mit patienten-spezifischer Funktionalität.
Skriptsammlung des DVM-AK „Zuverlässigkeit von Implantaten und Biostrukturen“, (2022) 1-15.

475) Wegner, N.; Vergin, J.; Walther, F.:
Validierung einer In-vitro-Kurzzeitprüfmethode durch Bewertung der Wasserstoffentwicklungsrate und Restermüdungsfestigkeit von Magnesium-Implantaten.
Skriptsammlung des DVM-AK „Zuverlässigkeit von Implantaten und Biostrukturen“, (2022) 1-12.

474) Keuntje, J.; Mrzljak, S.; Gerdes, L.; Wippo, V.; Kaierle, S.; Overmeyer, L.; Walther, F.; Jaeschke, P.:
Macroscopic simulation model for laser cutting of carbon fibre reinforced plastics.
Procedia CIRP 111 (2022) 496-500. https://doi.org/10.1016/j.procir.2022.08.078 - Download

473) Tenkamp, J.; Blinn, B.; Beck, T.; Walther, F.:
Microstructure- and plasticity-based fatigue and defect tolerance assessment of age-hardenable Al-Si cast alloys in LCF and HCF regime.
International Journal of Fatigue 166, 107240 (2022) 1-15. https://doi.org/10.1016/j.ijfatigue.2022.107240

472) Strodick, S.; Vogel, F.; Tilger, M.; Denstorf, M.; Kipp, M.; Baak, N.; Kukui, D.; Biermann, D.; Macias Barrientos, M.; Walther, F. :
Innovative X-ray diffraction and micromagnetic approaches for reliable residual stress assessment in deep rolled and microfinished AISI 4140 components.
Journal of Materials Research and Technology 20, (2022) 2942-2959. https://doi.org/10.1016/j.jmrt.2022.07.168 - Download

471) Merghany, M.; Teschke, M.; Stern, F.; Tenkamp, J.; Walther, F.:
Assessing the lightweight potential of additively manufactured metals by density-specific Woehler and Shiozawa diagrams.
Frontiers in Mechanical Engineering 8, 957859 (2022) 1-5. https://doi.org/10.3389/fmech.2022.957859 - Download

470) Tenkamp, J.; Stammkötter, S.; Merghany, M.; Walther, F. :
Uniform fatigue damage tolerance assessment for additively manufactured and cast Al-Si alloys: size and mean stress effects.
Additive Manufacturing Letters 3, 100076 (2022) 1-7. https://doi.org/10.1016/j.addlet.2022.100076 - Download

469) Kersting, L.; Arian, B.; Rozo Vasquez, J.; Trächtler, A.; Homberg, W.; Walther, F.:
Innovative online measurement and modelling approach for property-controlled flow forming processes.
Key Engineering Materials 926 (2022) 862-874. https://doi.org/10.4028/p-yp2hj3 - Download

468) Stern, F.; Becker, L.; Cui, C.; Tenkamp, J.; Uhlenwinkel, V.; Steinbacher, M.; Boes, J.; Lentz, J.; Fechte-Heinen, R.; Weber, S.; Walther, F.:
Improving the defect tolerance of PBF-LB/M processed 316L steel by increasing the nitrogen content.
Advanced Engineering Materials, 2200751 (2022) 1-13. https://doi.org/10.1002/adem.202200751 - Download

467) Hemmerich, M.; Klein, D. A.; Meyer, J.; Walther, F.:
Durability of the optical plastic polycarbonate under modulated blue LED irradiation at different duty cycles.
Optical Materials 131, 112713 (2022) 1-10. http://doi.org/10.1016/j.optmat.2022.112713

466) Hajavifard, R.; Afzal, M.J.; Rozo Vasquez, J.; Buhl, J.; Walther, F.:
Tailoring the surface integrity of disc springs for stabilization of residual stresses by incremental sheet forming.
M2D2022, Proceedings of the 9th International Conference on Mechanics and Materials in Design (2022) 259-266.

465) Otto, J. L.; Kalenborn, A.; Walther, F.:
Alloying-dependent microstructure influence on corrosion fatigue mechanisms of vacuum brazed AISI 304L/NiCrSiB joints.
Loet 2022, Proceedings of the 13th International Conference on Brazing, High Temperature Brazing and Diffusion Bonding, Aachen, DVS-Berichte Band 381. ISBN 978-3-96144-183-9 (2022) 63-68.

464) Blinn, B.; Tenkamp, J.; Walther, F.; Beck, T.:
Analysis of the cyclic deformation behavior of Al-Si-Mg cast alloy within single phases by using cyclic indentation tests.
LCF9 - Ninth International Conference on Low Cycle Fatigue (2022) 81-86. https://doi.org/10.48447/LCF9-2022-072

463) Tenkamp, J.; Walther, F.:
Cyclic deformation behaviour and fatigue damage tolerance in Al-Si-Mg cast alloy from LCF to HCF regime.
LCF9 - Ninth International Conference on Low Cycle Fatigue (2022) 75-80. https://doi.org/10.48447/LCF9-2022-073

462) Nickel, J.; Baak, N.; Walther, F.; Biermann, D.:
Investigation of the thermomechanical loads on the bore surface during single-lip deep hole drilling of steel components.
Procedia CIRP 108 (2022) 805-810. https://doi.org/10.1016/j.procir.2022.03.125

461) Baak, N.; Nickel, J.; Biermann, D.; Walther, F.:
Microstructure analysis of single-lip deep hole drilled bores by electron backscatter diffraction and magnetic Barkhausen noise.
Procedia CIRP 108 (2022) 740-745. https://doi.org/10.1016/j.procir.2022.03.114

460) Teschke, M.; Moritz, J.; Tenkamp, J.; Marquardt, A.; Leyens, C.; Walther, F.:
Defect-based characterization of the fatigue behavior of additively manufactured titanium aluminides.
International Journal of Fatigue 163, 107047 (2022) 1-9. https://doi.org/10.1016/j.ijfatigue.2022.107047

459) Möhring, K.; Walther, F.:
Forming stress-induced initial damage in case hardening steel 16MnCrS5 under cyclic axial loading in LCF regime.
Procedia Structural Integrity 24 (2022) 267-273. https://doi.org/10.1007/978-3-030-97822-8

458) Strodick, S.; Schmidt, R.; Biermann, D.; Zabel, A.; Walther, F. :
Influence of the cutting edge on the surface integrity in BTA deep hole drilling - part 2: Residual stress, microstructure and microhardness.
Procedia CIRP 108 (2022) 276-281. https://doi.org/10.1016/j.procir.2022.03.047 - Download

457) Schmidt, R.; Strodick, S.; Walther, F.; Biermann, D.; Zabel, A.:
Influence of the cutting edge on the surface integrity in BTA deep hole drilling - part 1: Design of experiments, roughness and forces.
Procedia CIRP 108 (2022) 329-334. https://doi.org/10.1016/j.procir.2022.03.055 - Download

456) Schmidt, R.; Brause, L.; Strodick, S.; Walther, F.; Biermann, D.; Zabel, A.:
Measurement and analysis of the thermal load in the bore subsurface zone during BTA deep hole drilling.
Procedia CIRP 107 (2022) 375-380. https://doi.org/10.1016/j.procir.2022.04.061 - Download

455) Strodick, S.; Baak, N.; Walther, F.:
Mikromagnetische Zustandsüberwachung und vorbeugende Instandhaltung hochbeanspruchter Bauteiloberflächen.
White Paper "Schadensmechanismen an Lagern 2022", VDI Wissensforum (2022).

454) Tenkamp, J.; Stern, F.; Walther, F.:
Uniform fatigue damage tolerance assessment for additively manufactured and cast Al-Si alloys: An elastic-plastic fracture mechanical approach.
Additive Manufacturing Letters 3, 100054 (2022) 1-8. https://doi.org/10.1016/j.addlet.2022.100054 - Download

453) Kotzem, D.; Teschke, M.; Juechter, V.; Körner, C.; Walther, F. :
Microstructure analysis and mechanical properties of electron beam powder bed fusion (PBF-EB)-manufactured γ-titanium aluminide (TiAl) at elevated temperatures.
Materials Testing 64 (5), (2022) 636-646. https://doi.org/10.1515/mt-2021-2137

452) Kotzem, D.; Höffgen, A.; Raveendran, R.; Stern, F.; Möhring, K.; Walther, F.:
Position-dependent mechanical characterization of the PBF-EB-manufactured Ti6Al4V alloy.
Progress in Additive Manufacturing 7 (2022) 249-260. https://doi.org/10.1007/s40964-021-00228-9 - Download

451) Wegner, N.; Vergin, J.; Walther, F.:
Electrochemical short-time testing method for simulating the degradation behavior of magnesium-based biomaterials.
Metals 12 (4), 591 (2022) 1-16. https://doi.org/10.3390/met12040591 - Download

450) Gerdes, L.; Richle, S.; Mrzljak, S.; Hülsbusch, D.; Barandun, G. A.; Walther, F.:
Computed tomography-based characterization of impact and fatigue after impact behavior of carbon fiber-reinforced polyurethane.
Composite Structures 289, 115474 (2022) 1-7. https://doi.org/10.1016/j.compstruct.2022.115474

449) Milz, M. P.; Wirtz, A.; Abdulgader, M.; Kalenborn, A.; Biermann, D.; Tillmann, W.; Walther, F.:
Corrosion fatigue behavior of twin wire arc sprayed and machine hammer peened ZnAl4 coatings on S355 J2C+C substrate.
Corrosion and Materials Degradation 3 (1), (2022) 127-141. https://doi.org/10.3390/cmd3010007 - Download

448) Brandt, R.; Walther, F.; Sehrt, J. T.; Biermann, D.; Lindner, M.; Stern, F.; Hase, S.; Tilger, M.:
The impact of additive manufacturing on the mechanical properties of a stainless precipitation hardening steel.
Science and Technology of Advanced Materials: Methods 2 (1), (2022) 38-49. https://doi.org/10.1080/27660400.2021.2023684

447) Teschke, M.; Moritz, J.; Telgheder, L.; Marquardt, A.; Leyens, C.; Walther, F.:
Characterization of the high-temperature behavior of PBF-EB/M manufactured γ titanium aluminides.
Progress in Additive Manufacturing (2022) 1-10. https://doi.org/10.1007/s40964-022-00274-x - Download

446) Stern, F.; Grabowski, J.; Elspaß, A.; Kotzem, D.; Kleszczynski, S.; Witt, G.; Walther, F.:
Influence assessment of artificial defects on the fatigue behavior of additively manufactured stainless steel 316LVM.
Procedia Structural Integrity 37 (2022) 153-158. https://doi.org/10.1016/j.prostr.2022.01.071 - Download

445) Hemmerich, M.; Scholz, R.; Meyer, J.; Walther, F.:
Photostability of polylactide with respect to blue LED radiation at very high irradiance and ambient temperature.
Materials Today Communications 31, 103307 (2022) 1-8. https://doi.org/10.1016/j.mtcomm.2022.103307

444) Wegner, N.; Klein, M.; Scholz, R.; Kotzem, D.; Macias Barrientos, M.; Walther, F.:
Mechanical in vitro fatigue testing of implant materials and components using advanced characterization techniques.
Journal of Biomedical Materials Research - Part B: Applied Biomaterials 110 (4), (2022) 898-909. https://doi.org/10.1002/jbm.b.34970 - Download

443) Milz, M. P.; Wirtz, A.; Abdulgader, M.; Biermann, D.; Tillmann, W.; Walther, F.:
Fatigue assessment of twin wire arc sprayed and machine hammer-peened ZnAl4 coatings on S355 JRC+C substrate.
Materials 15 (3), 1182 (2022) 1-18. https://doi.org/10.3390/ma15031182 - Download

442) Tillmann, W.; Abdulgader, M.; Wirtz, A.; Milz, M. P.; Biermann, D.; Walther, F.:
The effect of Argon as atomization gas on the microstructure, machine hammer peening post-treatment, and corrosion behavior of twin wire arc sprayed (TWAS) ZnAl4 coatings.
Coatings 12 (1), 32 (2022) 1-22. https://doi.org/10.3390/coatings12010032

441) Delp, A.; Freund, J.; Wu, S.; Scholz, R.; Löbbecke, M.; Haubrich, J.; Tröster, T.; Walther, F.:
Influence of laser-generated surface micro-structuring on the intrinsically bonded hybrid system CFRP-EN AW 6082-T6 on its corrosion properties.
Composite Structures 285, 115238 (2022) 1-9. https://doi.org/10.1016/j.compstruct.2022.115238

440) Felinks, N.; Sarafraz, Y.; Saelzer, J.; Walther, F.; Biermann, D.:
Influence of temperature in front face flow drilling and thread forming of lightweight cast alloys.
Procedia CIRP 104 (2021) 780-785. https://doi.org/10.1016/j.procir.2021.11.131

439) Reith, M.; Teschke, M.; Franke, M.; Tenkamp, J.; Walther, F.; Körner, C.:
Mechanical properties of a 4th generation γ-TiAl alloy processed via electron beam powder bed fusion.
Proceedings Intermetallics 2021, Hrsg.: M. Heilmaier, M. Krüger, S. Mayer, M. Palm, F. Stein, ISBN 978-3-948023-17-1 (2021) 80-81.

438) Teschke, M.; Moritz, J.; Marquardt, A.; Leyens, C.; Walther, F.:
High temperature deformation behavior of β-solidifying titanium aluminide alloy manufactured by electron beam powder bed fusion (EB-PBF).
Proceedings Intermetallics 2021, Hrsg.: M. Heilmaier, M. Krüger, S. Mayer, M. Palm, F. Stein, ISBN 978-3-948023-17-1 (2021) 71-72.

437) Leyens, C.; Moritz, J.; Marquardt, A.; Teschke, M.; Walther, F.:
Additive manufacturing of γ-titanium aluminides - challenges, solutions and future prospects.
Proceedings Intermetallics 2021, Hrsg.: M. Heilmaier, M. Krüger, S. Mayer, M. Palm, F. Stein, ISBN 978-3-948023-17-1 (2021) 43.

436) Tenkamp, J.; Awd, M.; Stern, F.; Kotzem, D.; Walther, F. :
Fatigue damage tolerance in additive manufactured metals applying enhanced measurement and modelling approaches.
46th MPA-Seminar Manuscripts: Additive Manufacturing, Hydrogen, Energy, Integrity (2021) 144-159.

435) Rocker, S.; Schiffers, R.; Gerdes, L.; Hülsbusch, D.; Walther, F.:
Lifetime prediction of continuous fiber-reinforced plastics based on nonlinear damage accumulation and finite element simulations.
ANTEC 2021 - Conference Proceedings of the 2021 SPE Annual Technical Conference, ISBN 978-1-7138-3075-7 (2021) 445-450.

434) Trautmann, M.; Ahmad, H.; Tenkamp, J.; Walther, F.; Wagner, G.:
Einfluss des Hochenergiekugelmahlens auf die mechanischen Eigenschaften der partikelverstärkten Aluminiumlegierung AlSi10Mg aus feldunterstütztem Sintern.
Werkstoffprüfung 2021 - Werkstoffe und Bauteile auf dem Prüfstand, Hrsg.: S. Brockmann und U. Krupp, ISBN 978-3-941269-98-9 (2021) 200-205.

433) Striemann, P.; Hülsbusch, D.; Niedermeier, M.; Walther, F.:
Leistungsfähigkeit der prozessinduzierten Grenzschicht von additiv gefertigten kurzfaserverstärkten Thermoplasten.
Werkstoffprüfung 2021 - Werkstoffe und Bauteile auf dem Prüfstand, Hrsg.: S. Brockmann und U. Krupp, ISBN 978-3-941269-98-9 (2021) 194-199.

432) Kotzem, D.; Raveendran, R.; Walther, F.:
Ganzheitliche Charakterisierung des Ermüdungsverhaltens PBF-EB-gefertigter Ti6Al4V-Gitterstrukturen.
Werkstoffprüfung 2021 - Werkstoffe und Bauteile auf dem Prüfstand, Hrsg.: S. Brockmann und U. Krupp, ISBN 978-3-941269-98-9 (2021) 74-79.

431) Tenkamp, J.; Walther, F.:
Mikrostrukturbasierte Bewertung des Ermüdungsverhaltens und der Schädigungstoleranz von additiv-gefertigten Al-Si-Mg-Werkstoffen.
Werkstoffprüfung 2021 - Werkstoffe und Bauteile auf dem Prüfstand, Hrsg.: S. Brockmann und U. Krupp, ISBN 978-3-941269-98-9 (2021) 62-67.

430) Tenkamp, J.; Stern, F.; Walther, F.:
Ermüdungsverhalten und Schädigungstoleranz additiv gefertigter Werkstoffe - Herausforderungen und Prüfstrategien.
Werkstoffprüfung 2021 - Werkstoffe und Bauteile auf dem Prüfstand, Hrsg.: S. Brockmann und U. Krupp, ISBN 978-3-941269-98-9 (2021) 5-10.

429) Otto, J. L.; Fedotov, I.; Penyaz, M.; Schaum, T.; Kalenborn, A.; Kalin, B.; Sevryukov, O.; Walther, F. :
Microstructure and defect-based fatigue mechanism evaluation of brazed coaxial Ti/Al2O3 joints for enhanced endoprosthesis design.
Materials 14 (24), 7895 (2021) 1-15. https://doi.org/10.3390/ma14247895 - Download

428) Bill, T.; Acosta, R.; Boller, C.; Donnerbauer, K.; Lücker, L.; Walther, F.; Heckmann, K.; Sievers, J.; Schopf, T.; Weihe, S.; Starke, P.:
A short-time approach for fatigue life evaluation of AISI 347 steel for nuclear power energy applications.
Applied Sciences 11 (23), 11405 (2021) 1-19. https://doi.org/10.3390/app112311405 - Download

427) Rozo Vasquez, J.; Arian, B.; Riepold, M.; Homberg, W.; Trächtler, A.; Walther, F.:
Magnetic Barkhausen noise analysis for microstructural effects separation during flow forming of metastable austenite 304L.
Proceedings of the 11th International Workshop NDT in Progress, NDT in Progress 2021 (12), (2021) 1-9.Download

426) Großwendt, F.; Röttger, A.; Strauch, A. L.; Chehreh, A. B.; Uhlenwinkel, V.; Fechte-Heinen, R.; Walther, F.; Weber, S.; Theisen, W.:
Additive manufacturing of a carbon-martensitic hot-work tool steel using a powder mixture - Microstructure, post-processing, mechanical properties.
Materials Science and Engineering: A 827, 142038 (2021) 1-14. https://doi.org/10.1016/j.msea.2021.142038

425) Acosta, R.; Heckmann, K.; Sievers, J.; Schopf, T.; Bill, T.; Starke, P.; Donnerbauer, K.; Lücker, L.; Walther, F.; Boller, C.:
Microstructure-based lifetime assessment of austenitic steel AISI 347 in view of fatigue, environmental conditions and NDT.
Applied Sciences 11 (23), 11214 (2021) 1-21. https://doi.org/10.3390/app112311214 - Download

424) Kukreja, L. M.; Hoppius, J. S.; Elango, K.; Macias Barrientos, M.; Pöhl, F.; Walther, F.; Gurevich, E. L.; Ostendorf, A.:
Optimization of processing parameters of ultra-short (100 fs-2 ps) pulsed laser shock peening of stainless steel.
Journal of Laser Applications 33 (4), 042048 (2021) 1-9. https://doi.org/10.2351/7.0000475

423) Nickel, J.; Baak, N.; Volke, P.; Walther, F.; Biermann, D.:
Thermomechanical impact of the single-lip deep hole drilling on the surface integrity on the example of steel components.
Journal of Manufacturing and Materials Processing 5 (4), 120 (2021) 1-13. https://doi.org/10.3390/jmmp5040120

422) Sarafraz, Y.; Koch, A.; Felinks, N.; Biermann, D.; Walther, F.:
Influence of pre-drilling on hardness and tensile failure of formed internal threads in thin-walled AZ91 cast alloys.
Engineering Failure Analysis 130, 105783 (2021) 1-14. https://doi.org/10.1016/j.engfailanal.2021.105783

421) Felinks, N.; Overberg, T.; Sarafraz, Y.; Walther, F.; Biermann, D.:
Adapted process strategies in front face flow drilling and thread forming of lightweight casting materials.
Procedia CIRP 103 (2021) 213-218. https://doi.org/10.1016/j.procir.2021.10.034

420) Heene, S.; Thoms, S.; Kalies, S.; Wegner, N.; Peppermüller, P.; Born, N.; Walther, F.; Scheper, T.; Blume, C. A.:
Vascular network formation on macroporous polydioxanone scaffolds.
Tissue Engineering Part A 27 (19-20), (2021) 1239-1249. https://doi.org/10.1089/ten.tea.2020.0232

419) Strodick, S.; Schmidt, R.; Gerdes, L.; Zabel, A.; Biermann, D.; Walther, F.:
Impact of cutting parameters on the mechanical properties of BTA deep drilled components under quasi-static compression.
Procedia CIRP 103 (2021) 207-212. https://doi.org/10.1016/j.procir.2021.10.033 - Download

418) Wirtz, A.; Abdulgader, M.; Milz, M. P.; Tillmann, W.; Walther, F.; Biermann, D.:
Thermally assisted machine hammer peening of arc-sprayed ZnAl-based corrosion protective coatings.
Journal of Manufacturing and Materials Processing 5 (4), (2021) 109. https://doi.org/10.3390/jmmp5040109

417) Hajavifard, R.; Afzal, M. J.; Möhring, K.; Buhl, J.; Walther, F.:
Gezielte Einbringung von Eigenspannungen durch inkrementelle Blechumformung zur Verbesserung der Leistungsfähigkeit austenitischer Tellerfedern.
Ilmenauer Federntag 2021 Tagungsband, Verlag ISLE, ISBN 978-3-948595-05-0 (2021) 101-110.

416) Huang, X.; Schmidt, R.; Strodick, S.; Walther, F.; Biermann, D.; Zabel, A.:
Simulation and modeling of the residual stress state in the sub-surface zone of BTA deep-hole drilled specimens with eigenstrain theory.
Procedia CIRP 102 (2021) 150-155. https://doi.org/10.1016/j.procir.2021.09.026

415) Mylo, M. D.; Hofmann, M.; Delp, A.; Scholz, R.; Walther, F.; Speck, T.; Speck, O.:
Advances on the visualization of the internal structures of the European mistletoe: 3D reconstruction using microtomography.
Frontiers in Plant Science 12, 715711 (2021) 1-13. https://doi.org/10.3389/fpls.2021.715711 - Download

414) Arian, B.; Riepold, M.; Rozo Vasquez, J.; Homberg, W.; Trächtler, A.; Walther, F.:
Forming of metastable austenitic stainless steel tubes with axially graded martensite content by flow-forming.
ESAFORM 2021, Proceedings of the 24th International Conference on Material Forming, (2021) 1-9. https://doi.org/10.25518/esaform21.2759 - Download

413) Sommereyns, A.; Gann, S.; Schmidt, J.; Chehreh, A. B.; Lüddecke, A.; Walther, F.; Gökce, B.; Barcikowski, S.; Schmidt, M.:
Quality over quantity: How different dispersion qualities of minute amounts of nano-additives affect material properties in powder bed fusion of polyamide 12.
Materials 14 (18), 5322 (2021) 1-21. https://doi.org/10.3390/ma14185322 - Download

412) Tillmann, W.; Abdulgader, M.; Hagen, L.; Biermann, D.; Timmermann, A.; Wirtz, A.; Walther, F.; Milz, M. P.:
Mechanical and microstructural properties of post-treated Zn4Al sprayed coatings using twin wire arc spraying.
Thermal Spray 2021, Proceedings from the International Thermal Spray Conference, (2021) 750-757. https://doi.org/10.31399/asm.cp.itsc2021p0750

411) Hemmerich, M.; Saha, S.; Latein, C.; Meyer, J.; Walther, F.:
Manufacture and evaluation of transparent optical components for luminaires made from the bio-plastic polylactide.
LICHT2021 Tagungsband, Hrsg.: Deutsche Lichttechnische Gesellschaft e.V., ISBN 978-3-927787-98-8 (2021) 634-647.

410) Riepold, M.; Arian, B.; Rozo Vasquez, J.; Homberg, W.; Walther, F.; Trächtler, A.:
Model approaches for closed-loop property control for flow forming.
Advances in Industrial and Manufacturing Engineering 3, 100057 (2021) 1-9. https://doi.org/10.1016/j.aime.2021.100057 - Download

409) Penyaz, M.; Otto, J. L.; Popov, N.; Ivannikov, A.; Schmiedt-Kalenborn, A.; Walther, F.; Kalin, B.:
Microstructure influence on corrosion resistance of brazed AISI 304L/NiCrSiB joints.
Metals and Materials International, (2021) 1-10. https://doi.org/10.1007/s12540-021-00974-z

408) Otto, J. L.; Penyaz, M.; Schmiedt-Kalenborn, A.; Ivannikov, A.; Kalin, B.; Walther, F.:
Influence of alloying and holding time on microstructure and corrosion fatigue behaviour of brazed AISI 304L/NiCrSiB joints.
4. Symposium Materialtechnik, (2021) 1-10. https://doi.org/10.21268/20210519-3 - Download

407) Großwendt, F.; Becker, L.; Röttger, A.; Chehreh, A. B.; Strauch, A. L.; Uhlenwinkel, V.; Lentz, J.; Walther, F.; Fechte-Heinen, R.; Weber, S.; Theisen, W.:
Impact of the allowed compositional range of additively manufactured 316L stainless steel on processability and material properties.
Materials 14 (15), 4074 (2021) 1-19. https://doi.org/10.3390/ma14154074

406) Chehreh, A. B.; Strauch, A.; Großwendt, F.; Röttger, A.; Fechte-Heinen, R.; Theisen, W.; Walther, F.:
Influence of different alloying strategies on the mechanical behavior of tool steel produced by laser-powder bed fusion.
Materials 14 (12), 3344 (2021) 1-18. https://doi.org/10.3390/ma14123344 - Download

405) Strauch, A. L.; Uhlenwinkel, V.; Steinbacher, M.; Großwendt, F.; Röttger, A.; Chehreh, A. B.; Walther, F.; Fechte-Heinen, R.:
Comparison of the processability and influence on the microstructure of different starting powder blends for laser powder bed fusion of a Fe3.5Si1.5C alloy.
Metals 11 (7), 1107 (2021) 1-21. https://doi.org/10.3390/met11071107

404) Moritz, J.; Teschke, M.; Marquardt, A.; Stepien, L.; López, E.; Brückner, F.; Macias Barrientos, M.; Walther, F.; Leyens, C. :
Electron beam powder bed fusion of γ-titanium aluminide: Effect of processing parameters on part density, surface characteristics, and aluminum content.
Metals 11 (7), 1093 (2021) 1-19. https://doi.org/10.3390/met11071093 - Download

403) Kotzem, D.; Gerdes, L.; Walther, F.:
Microstructure and strain rate-dependent deformation behavior of PBF-EB Ti6Al4V lattice structures.
Materials Testing 63 (6), (2021) 529-536. https://doi.org/10.1515/mt-2020-0087

402) Nickel, J.; Baak, N.; Volke, P.; Walther, F.; Biermann, D.:
Thermal influence on the surface integrity during single-lip deep hole drilling of steel components.
MM Science Journal (3), (2021) 4636-4643. http://dx.doi.org/10.17973/MMSJ.2021_7_2021070

401) Hülsbusch, D.; Helwing, R.; Mrzljak, S.; Walther, F.:
Damage behavior of glass fiber-reinforced polymers in the VHCF regime investigated by intermittent in situ X-ray computed tomography.
VHCF8, Proceedings of the 8th International Conference on Very High Cycle Fatigue, (2021) 1-6.

400) Baak, N.; Hajavifard, R.; Lücker, L.; Rozo Vasquez, J.; Strodick, S.; Teschke, M.; Walther, F.:
Micromagnetic approaches for microstructure analysis and capability assessment.
Materials Characterization 178, 111189 (2021) 1-14. https://doi.org/10.1016/j.matchar.2021.111189

399) Delp, A.; Becker, A.; Hülsbusch, D.; Scholz, R.; Müller, M.; Glasmacher, B.; Walther, F.:
In situ characterization of polycaprolactone fiber response to quasi-static tensile loading in scanning electron microscopy.
Polymers 13, 2090 (2021) 1-17. https://doi.org/10.3390/polym13132090 - Download

398) Mrzljak, S.; Schumacher, E.; Böhm, S.; Walther, F.:
Influence of welding process parameters and corrosion on the fatigue strength of magnetic pulse welded aluminium/steel hybrid sheets.
Welding and Cutting 20 No. 2, (2021) 138-144.

397) Mrzljak, S.; Schmidt, S.; Kohl, A.; Hülsbusch, D.; Hausmann, J.; Walther, F.:
Testing procedure for fatigue characterization of steel-CFRP hybrid laminate considering material dependent self-heating.
Materials 14 (12), 3394 (2021) 1-17. https://doi.org/10.3390/ma14123394 - Download

396) Striemann, P.; Hülsbusch, D.; Niedermeier, M.; Walther, F.:
Application-oriented assessment of the interlayer tensile strength of additively manufactured polymers.
Additive Manufacturing 46, 102095 (2021) 1-8. https://doi.org/10.1016/j.addma.2021.102095

395) Koch, A.; Henkel, T.; Walther, F.:
Mechanism-oriented characterization of the anisotropy of extruded profiles based on solid-state recycled EN AW-6060 aluminum chips.
Engineering Failure Analysis 121, 105099 (2021) 1-9. https://doi.org/10.1016/j.engfailanal.2020.105099

394) Hajavifard, R.; Afzal, M. J.; Möhring, K.; Buhl, J.; Walther, F.:
Characterisation of phase transformation and induced residual stresses in incrementally formed disc springs : an experimental and numerical study.
4. Symposium Materialtechnik, (2021) 1-15. https://doi.org/10.21268/20210518-0 - Download

393) Timmermann, A.; Abdulgader, M.; Hagen, L.; Milz, M. P.; Wirtz, A.; Biermann, D.; Tillmann, W.; Walther, F.:
Charakterisierung lichtbogengespritzter, mittels „Machine Hammer Peening“ nachbehandelter Korrosionsschutzschichten.
Thermal Spray Bulletin 14 (1), (2021) 46-52.

392) Afzal, M. J.; Hajavifard, R.; Buhl, J.; Walther, F.; Bambach, M.:
Influence of process parameters on the residual stress state and properties in disc springs made by incremental sheet forming (ISF).
Forschung im Ingenieurwesen, (2021) 1-11. https://doi.org/10.1007/s10010-021-00491-w - Download

391) Maqbool, F.; Maaß, F.; Buhl, J.; Hahn, M.; Hajavifard, R.; Walther, F.; Tekkaya, A.E.; Bambach, M.:
Targeted residual stress generation in single and two point incremental sheet forming (ISF).
Archive of Applied Mechanics, (2021) 1-23. https://doi.org/10.1007/s00419-021-01935-z - Download

390) Heckmann, K.; Sievers, J.; Schopf, T.; Lücker, L.; Schmiedt-Kalenborn, A.; Walther, F.; Starke, P.; Acosta, R.; Boller, C.:
Correlation of load drop and crack initiation criteria in fatigue life experiments of metallic materials.
Engineering Fracture Mechanics 251, 107785 (2021) 1-14. https://doi.org/10.1016/j.engfracmech.2021.107785

389) Mrzljak, S.; Delp, A.; Schlink, A.; Zarges, J.-C.; Hülsbusch, D.; Heim, H.-P.; Walther, F.:
Constant temperature approach for the assessment of injection molding parameter influence on the fatigue behavior of short glass fiber reinforced polyamide 6.
Polymers 13, 1569 (2021) 1-20. https://doi.org/10.3390/polym13101569 - Download

388) Koch, A.; Ursinus, J.; Behrens, B.-A.; Walther, F.:
Computed tomography-based defect characterization and prediction of fatigue properties of extrudates from recycled field-assisted sintered EN AW-6082 aluminium chips.
Fatigue 2021, Proceedings of the 8th Engineering Integrity Society International Conference on Durability and Fatigue, (2021) 170-182.

387) Baak, N.; Nickel, J.; Deiters, A.; Biermann, D., Walther, F.:
Barkhausen noise-based assessment of single lip-deep drilling focused on fatigue life improvement of AISI 4140 component-near specimens.
Fatigue 2021, Proceedings of the 8th Engineering Integrity Society International Conference on Durability and Fatigue, (2021) 195-204.

386) Mrzljak, S.; Trautmann, M.; Wagner, G.; Walther, F.:
Influence of the layer structure and metal volume fraction on the fatigue behaviour of thermoplastic-based hybrid laminates.
Fatigue 2021, Proceedings of the 8th Engineering Integrity Society International Conference on Durability and Fatigue, (2021) 421-432.

385) Striemann, P.; Gerdes, L.; Hülsbusch, D.; Niedermeier, M.; Walther, F.:
Interlayer bonding capability of additively manufactured polymer structures under high strain rate tensile and shear loading.
Polymers 13, 1301 (2021) 1-11. https://doi.org/10.3390/polym13081301 - Download

384) Zabel, A.; Strodick, S.; Schmidt, R.; Walther, F.; Biermann, D.; Wegert, R.; Eisseler, R.; Möhring, H.-C.; Guski, V.; Schmauder, S.:
Oberflächenkonditionierung beim Tiefbohren - Teil 2.
wt Werkstattstechnik online 111, 03 (2021) 118-123. https://doi.org/10.37544/1436-4980-2021-03-26

383) Scholz, R. ; Langhansl, M.; Hemmerich, M.; Meyer, J.; Zollfrank, C.; Walther, F.:
Impact of solar radiation on chemical structure and micromechanical properties of cellulose-based humidity-sensing material Cottonid.
Functional Composite Materials 2, 9 (2021) 1-11. https://doi.org/10.1186/s42252-021-00022-4 - Download

382) Dörrstein, J.; Schwarz, D.; Scholz, R.; Walther, F.; Zollfrank, C.:
Tuneable material properties of Organosolv lignin biocomposites in response to heat and shear forces.
European Polymer Journal 148, 110359 (2021) 1-11. https://doi.org/10.1016/j.eurpolymj.2021.110359

381) Scholz, R.; Delp, A.; Walther, F.:
In situ characterization of the damage initiation and evolution in sustainable cellulose-based Cottonid.
TMS 2021 Annual Meeting & Exhibition Supplemental Proceedings, The Minerals, Metals & Materials Series, (2021) 867-878. https://doi.org/10.1007/978-3-030-65261-6_77

380) Awd, M.; Walther, F.; Siddique, S.; Fatemi, A.:
Microstructure and fatigue damage evolution in additive-manufactured metals using enhanced measurement techniques and modeling approaches.
TMS 2021 Annual Meeting & Exhibition Supplemental Proceedings, The Minerals, Metals & Materials Series, (2021) 753-762. https://doi.org/10.1007/978-3-030-65261-6_68

379) Otto, J. L.; Penyaz, M.; Möhring, K.; Gerdes, L.; Schaum, T.; Ivannikov, A.; Schmiedt-Kalenborn, A.; Kalin, B.; Walther, F.:
Microstructure, residual stresses, and strain-rate-dependent deformation and fracture behavior of AISI 304L joints brazed with NiCrSiB filler metals.
Metals 11 (4), 593 (2021) 1-24. https://doi.org/10.3390/met11040593 - Download

378) Zabel, A.; Strodick, S.; Schmidt, R.; Walther, F.; Biermann, D.; Wegert, R.; Eisseler, R.; Möhring, H.-C.; Guski, V.; Schmauder, S.:
Oberflächenkonditionierung beim Tiefbohren - Teil 1.
wt Werkstattstechnik online 111, 01/02 (2021) 52-58. https://doi.org/10.37544/1436-4980-2021-01-02-56

377) Nebe, M.; Soriano, A.; Braun C.; Middendorf, P.; Walther, F.:
Analysis on the internal pressure loading of composite pressure vessels: FE modeling and experimental correlation.
Composites Part B: Engineering 212, 108550 (2021) 1-15. https://doi.org/10.1016/j.compositesb.2020.108550

376) Kotzem, D.; Kleszczynski, S.; Stern, F.; Elspaß, A.; Tenkamp, J.; Witt, G.; Walther, F.:
Impact of single structural voids on fatigue properties of AISI 316L manufactured by laser powder bed fusion.
International Journal of Fatigue 148, 106207 (2021) 1-10. https://doi.org/10.1016/j.ijfatigue.2021.106207

375) Wegner, N.; Walther, F.:
Assessment of galvanostatic anodic polarization to accelerate the corrosion of the bioresorbable magnesium alloy WE43.
Applied Sciences 11, 2128 (2021) 1-15. https://doi.org/10.3390/app11052128 - Download

374) Striemann, P.; Bulach, S.; Hülsbusch, D.; Niedermeier, M.; Walther, F.:
Shear characterization of additively manufactured short carbon fiber-reinforced polymer.
Macromolecular Symposia 395, 200247 (2021) 1-5. https://doi.org/10.1002/masy.202000247

373) Ungermann, D.; Hatke, P.; Knyazeva, M.; Walther, F.; Lebelt, P.; Gehrke, J.:
Innovationen zum optimalen Einsatz des wetterfesten Baustahls im Stahl- und Verbundbrückenbau.
Stahlbau 90 (2), (2021) 106-115. https://doi.org/10.1002/stab.202000090

372) Langenfeld, K.; Möhring, K.; Walther, F.; Mosler, J.:
Modeling gradient-enhanced anisotropic ductile damage: Application to low cycle fatigue.
Proceedings in Applied Mathematics & Mechanics 20, 1 (2021) 1-2. https://doi.org/10.1002/pamm.202000157 - Download

371) Hartjen, P.; Wegner, N.; Ahmadi, P.; Matthies, L.; Nada, O.; Fuest, S.; Yan, M.; Knipfer, C.; Gosau, M.; Walther, F.; Smeets, R.:
Toward tailoring the degradation rate of magnesium-based biomaterials for various medical applications: assessing corrosion, cytocompatibility and immunological effects.
International Journal of Molecular Sciences 22 (2), 971 (2021) 1-13. https://doi.org/10.3390/ijms22020971 - Download

370) Kotzem, D.; Tazerout, D.; Arold, T.; Niendorf, T.; Walther, F.:
Failure mode map for E-PBF manufactured Ti6Al4V sandwich panels.
Engineering Failure Analysis 121, 105159 (2021) 1-14. https://doi.org/10.1016/j.engfailanal.2020.105159

369) Doñate-Buendia, C.; Kürnsteiner, P.; Stern, F.; Wilms, M.B.; Streubel, R.; Kusoglu, I.M.; Tenkamp, J.; Bruder, E.; Pirch, N.; Barcikowski, S.; Durst, K.; Schleifenbaum, J.H.; Walther, F.; Gault, B.; Gökce, B.:
Microstructure formation and mechanical properties of ODS steels built by laser additive manufacturing of nanoparticle coated iron-chromium powders.
Acta Materialia 206, 116566 (2021) 1-15. https://doi.org/10.1016/j.actamat.2020.116566

368) Nebe, M.; Schmack, T.; Schaefer, T.; Walther, F.:
Experimental and numerical investigation on the impact response of CFRP under 3-point-bending.
Composites Part C: Open Access 4, 100079 (2021) 1-9. https://doi.org/10.1016/j.jcomc.2020.100079 - Download

 

2019 - 2020

367) Mrzljak, S.; Schumacher, E.; Böhm, S.; Walther, F.:
Einfluss der Schweißprozessparameter und Korrosion auf die Schwingfestigkeit magnetimpulsgeschweißter Aluminium-Stahl-Hybridbleche.
Schweißen und Schneiden 72, (2020) 782-789.

366) Lingnau, L. A.; Otto, J. L.; Schmiedt-Kalenborn, A.; Walther, F.:
Prüffrequenz- und chargenabhängiges Ermüdungs- und Korrosionsermüdungsverhalten der Nickellötverbindung 1.4307/Ni620.
Werkstoffprüfung 2020 – Werkstoffe und Bauteile auf dem Prüfstand (2020), Hrsg.: J. B. Langer und M. Wächter. https://doi.org/10.48447/WP-2020-014

365) Gerdes, L.; Mrzljak, S.; Hülsbusch, D.; Walther, F.:
Korrelation der Energieabsorption und des Versagensverhaltens für hochdynamische Beanspruchung von glasfaserverstärktem Epoxid.
Werkstoffprüfung 2020 – Werkstoffe und Bauteile auf dem Prüfstand (2020), Hrsg.: J. B. Langer und M. Wächter. https://doi.org/10.48447/WP-2020-011

364) Teschke, M.; Kotzem, D.; Beermann, L.; Walther, F.:
Einfluss hoher Temperatur auf die mechanischen Eigenschaften von mittels Elektronenstrahlschmelzen (E-PBF) gefertigten γ-Titanaluminiden.
Werkstoffprüfung 2020 – Werkstoffe und Bauteile auf dem Prüfstand (2020), Hrsg.: J. B. Langer und M. Wächter. https://doi.org/10.48447/WP-2020-010

363) Hemmerich, M.; Meyer, J.; Walther, F.:
Evaluierung des erneuerbaren Biokunststoffs Polylactid für optische Elemente in Beleuchtungssystemen.
Werkstoffprüfung 2020 – Werkstoffe und Bauteile auf dem Prüfstand (2020), Hrsg.: J. B. Langer und M. Wächter. https://doi.org/10.48447/WP-2020-050

362) Kotzem, D.; Ohlmeyer, H.; Walther, F.:
Damage tolerance evaluation of a unit cell plane based on electron beam powder bed fusion (E-PBF) manufactured Ti6Al4V alloy.
Procedia Structural Integrity 28 (2020) 11-18. https://doi.org/10.1016/j.prostr.2020.10.003 - Download

361) Wegner, N.; Knyazeva, M.; Walther, F.:
Elektrochemisch-basierte Kurzzeitprüfmethode zur Bewertung des Korrosionsverhaltens der biomedizinischen Magnesium-Legierung WE43MEO.
Skriptsammlung des DVM-AK „Zuverlässigkeit von Implantaten und Biostrukturen“, (2020) 13-25.

360) Trautmann, M.; Mrzljak, S.; Walther, F.; Wagner, G.:
Mechanical properties of thermoplastic-based hybrid laminates with regard to layer structure and metal volume content.
Metals 10 (11), 1430 (2020) 1-14. https://doi.org/10.3390/met10111430 - Download

359) Kotzem, D.; Tazerout, D.; Walther, F.:
Vorhersage des dominierenden Versagensmechanismus mittels Elektronenstrahlschmelzen (E-PBF) gefertigter Ti6Al4V Sandwichstrukturen.
5. Tagung des DVM-AK Additiv gefertigte Bauteile und Strukturen, Hrsg.: H.-A. Richard, DVM e.V., ISSN 2509-8772 (2020) 15-27.

358) Strodick, S.; Berteld, K.; Schmidt, R.; Biermann, D.; Zabel, A.; Walther, F.:
Influence of cutting parameters on the formation of white etching layers in BTA deep hole drilling.
Technisches Messen 87 (11), (2020) 674-682. https://doi.org/10.1515/teme-2020-0046

357) Stern, F.; Lüneburg, B.; Rollmann, J.; Pape, F.; Pantke, K.; Awd, M.; Tenkamp, J.; Walther, F.:
Evaluation of the influence of non-metallic inclusions on the high and very high cycle fatigue life of inductive hardened bearing steel in multi-megawatt wind turbines.
International Bearing Conference, Proceedings of Bearing World 2020 (2020) 67-70.

356) Chehreh, A. B.; Grätzel, M.; Bergmann, J. P.; Walther, F.:
Fatigue behavior of conventional and stationary shoulder friction stir welded EN AW-5754 aluminum alloy using load increase method.
Metals 10 (11), 1510 (2020) 1-11. https://doi.org/10.3390/met10111510 - Download

355) Nickel, J.; Volke, P.; Baak, N.; Walther, F.; Biermann, D.:
Analyse der thermischen Randzonenbeeinflussung beim Einlippentiefbohren.
Unter Span (2020) 14.

354) Hülsbusch, D.; Helwing, R.; Mrzljak, S.; Walther, F.:
Comparison of the damage evolution in glass fiber-reinforced polyurethane and epoxy in the HCF and VHCF regimes investigated by intermittent in situ X-ray computed tomography.
IOP Conference Series: Materials Science and Engineering 942 (2020) 012036 1-8. https://doi.org/10.1088/1757-899X/942/1/012036 - Download

353) Timmermann, A.; Abdulgader, M.; Hagen, L.; Koch, A.; Wittke, P.; Biermann, D.; Tillmann, W.; Walther, F.:
Effect of machine hammer peening on the surface integrity of a ZnAl-based corrosion protective coating.
MATEC Web of Conferences 318 (4), 1008 (2020) 1-6. https://doi.org/10.1051/matecconf/202031801008 - Download

352) Koch, A.; Bonhage, M.; Teschke, M.; Lücker, L.; Behrens, B.-A.; Walther, F.:
Electrical resistance-based fatigue assessment and capability prediction of extrudates from recycled field-assisted sintered EN AW-6082 aluminium chips.
Materials Characterization 169, 110644 (2020) 1-8. https://doi.org/10.1016/j.matchar.2020.110644

351) Grätzel, M.; Bergmann, J. P.; Chehreh, A. B.; Koch, A.; Walther, F.:
Einfluss des Verhältnisses aus Drehrichtung und Geschwindigkeit am FSW-Werkzeug auf die Ermüdungsfestigkeit von Al-Legierungen.
1. Schweißen und Schneiden 72 (2020) 558-565.
2. DVS Congress, Proceedings of the DVS Congress 2020 (2020) 608-615.

350) Hemmerich, M.; Meyer, J.; Walther, F.:
Advanced test setup for accelerated aging of plastics by visible LED radiation.
Materials 13 (19), 4261 (2020) 1-16. https://doi.org/10.3390/ma13194261 - Download

349) Chehreh, A. B.; Grätzel, M.; Bergmann, J. P.; Walther, F.:
Effect of corrosion and surface finishing on fatigue behavior of friction stir welded EN AW-5754 aluminum alloy using various tool configurations.
Materials 13 (14), 3121 (2020) 1-20. https://doi.org/10.3390/ma13143121 - Download

348) Taruttis, A.; Hardes, C.; Röttger, A.; Uhlenwinkel, V.; Chehreh, A. B.; Theisen, W.; Walther, F.; Zoch, H. W.:
Laser additive manufacturing of hot work tool steel by means of a starting powder containing partly spherical pure elements and ferroalloys.
Procedia CIRP 94 (2020) 46-51. https://doi.org/10.1016/j.procir.2020.09.010 - Download

347) Schumacher, E.; Mrzljak, S.; Walther, F.; Böhm, S.:
Magnetimpulsschweißen - Einfluss der Oberflächentopographie und Korrosion auf die Schwingfestigkeit geschweißter Stahl/Aluminium-Hybridbleche.
DVS Congress, Proceedings of the DVS Congress 2020 (2020) 789-795.

346) Doñate-Buendia, C.; Streubel, R.; Kürnsteiner, P.; Wilms, M. B.; Stern, F.; Tenkamp, J.; Bruder, E.; Barcikowski, S.; Gault, B.; Durst, K.; Schleifenbaum, J. H.; Walther, F.; Gökce, B.:
Effect of nanoparticle additivation on the microstructure and microhardness of oxide dispersion strengthened steels produced by laser powder bed fusion and directed energy deposition.
Procedia CIRP 94 (2020) 41-45. https://doi.org/10.1016/j.procir.2020.09.009 - Download

345) Rozo Vasquez, J.; Arian, B.; Riepold, M.; Homberg, W.; Ansgar, T.; Walther, F.:
Microstructural investigation on phase transformation during flow forming of the metastable austenite AISI 304.
Sonderbände der Praktische Metallographie zur 54. Metallographie-Tagung - Fortschritte in der Metallographie, Hrsg.: A. Neidel, ISBN 978-3-88355-422-8 (2020) 75-81.

344) Choudhary, R.; Venkatraman, S. K.; Bulygina, I.; Chatterjee, A.; Abraham, J.; Fedor, S.; Kaloshkin, S.; Ilyasov, A.; Abakumov, M.; Knyazeva, M.; Kukui, D.; Walther, F.; Swamiappan, S.:
Impact of forsterite addition on mechanical and biological properties of composites.
Journal of Asian Ceramic Societies 8, 3 (2020) 1-15. https://doi.org/10.1080/21870764.2020.1807695 - Download

343) Tenkamp, J.; Awd, M.; Siddique, S.; Starke, P.; Walther, F.:
Fracture-mechanical assessment of the effect of defects on the fatigue lifetime and limit in cast and additively manufactured aluminum-silicon alloys from HCF to VHCF regime.
Metals 10 (7), 943 (2020) 1-18. https://doi.org/10.3390/met10070943 - Download

342) Otto, J. L.; Penyaz, M.; Schmiedt-Kalenborn, A.; Knyazeva, M.; Ivannikov, A.; Kalin, B.; Walther, F.:
Effect of phase formation due to holding time of vacuum brazed AISI 304L/NiCrSiB joints on corrosion fatigue properties.
Journal of Materials Research and Technology 9, 5 (2020) 10550-10558. https://doi.org/10.1016/j.jmrt.2020.07.047 - Download

341) Mrzljak, S.; Trautmann, M.; Wagner, G.; Walther, F.:
Influence of aluminum surface treatment on tensile and fatigue behavior of thermoplastic-based hybrid laminates.
Materials 13 (14), 3080 (2020) 1-18. https://doi.org/10.3390/ma13143080 - Download

340) Mrzljak, S.; Trautmann, M.; Wagner, G.; Walther, F.:
Influence of surface treatment on fatigue properties of thermoplastic based hybrid laminates.
Hybrid 2020, Proceedings 4th International Conference Materials and Structures (2020) 65-70.

339) Trautmann, M.; Mrzljak, S.; Walther, F.; Wagner, G.:
Influence of surface treatment on interfacial strength and tensile properties of thermoplastic based hybrid laminates.
Hybrid 2020, Proceedings 4th International Conference Materials and Structures (2020) 59-64.

338) Acosta, R.; Wu, H.; Venkat, R. S.; Weber, F.; Tenkamp, J.; Walther, F.; Starke, P. :
SteBLife, a new approach for the accelerated generation of metallic materials’ fatigue data.
Metals 10 (6), 798 (2020) 1-17. https://doi.org/10.3390/met10060798 - Download

337) Möhring, K.; Walther, F.:
Performance-related characterization of forming-induced initial damage in 16MnCrS5 steel under a torsional forward-reverse loading path at LCF regime.
Materials 13 (11), 2463 (2020) 1-17. https://doi.org/10.3390/ma13112463 - Download

336) Hajavifard, R.; Maqbool, F.; Bambach, M.; Walther, F.:
Experimental and numerical studies on the use of incremental sheet forming to improve the austenitic disc spring characteristics through tailoring their microstructure and residual stress properties.
IRF 2020, Proceedings of the 7th International Conference on Integrity-Reliability-Failure, (2020) 247-258.

335) Boes, J.; Röttger, A.; Theisen, W.; Cui, C.; Uhlenwinkel, V.; Schulz, A.; Zoch, H.-W.; Stern, F.; Tenkamp, J.; Walther, F.:
Gas atomization and laser additive manufacturing of nitrogen-alloyed martensitic stainless steel.
Additive Manufacturing (2020) 101379 1-12. https://doi.org/10.1016/j.addma.2020.101379

334) Möhring, K.; Walther, F.:
Load direction-dependent influence of forming induced initial damage on the fatigue performance of 16MnCrS5 steel.
Materials 13 (12), 2680 (2020) 1-19. https://doi.org/10.3390/ma13122680 - Download

333) Schmidt, R.; Strodick, S.; Walther, F.; Biermann, D.; Zabel, A.:
Analysis of the functional properties in the bore sub-surface zone during BTA deep-hole drilling.
Procedia CIRP 88 (2020) 318-323. https://doi.org/10.1016/j.procir.2020.05.055

332) Striemann, P.; Hülsbusch, D.; Mrzljak, S.; Niedermeier, M.; Walther, F.:
Systematic approach for the characterization of additive manufactured and injection molded short carbon fiber-reinforced polymers under tensile loading.
Materials Testing 62 (6), (2020), 561-567. https://doi.org/10.3139/120.111517 - Download

331) Schmidt, R.; Strodick, S.; Walther, F.: Biermann, D.; Zabel, A.:
Influence of the process parameters and forces on the bore sub-surface zone in BTA deep-hole drilling of AISI 4140 and AISI 304 L.
Procedia CIRP 87 (2020) 41-46. https://doi.org/10.1016/j.procir.2020.02.010

330) Teschke, M.; Rozo Vasquez, J.; Lücker, L.; Walther, F.:
Characterization of damage evolution on hot flat rolled mild steel sheets by means of micromagnetic parameters and fatigue strength determination.
Materials 13 (11), 2486 (2020) 1-19. https://doi.org/10.3390/ma13112486 - Download

329) Striemann, P.; Hülsbusch, D.; Niedermeier, M.; Walther, F.:
Optimization and quality evaluation of the interlayer bonding performance of additively manufactured polymer structures.
Polymers 12, 1166 (2020) 1-11. https://doi.org/10.3390/polym12051166 - Download

328) Scholz, R.; Delp, A.; Walther, F.:
In situ characterization of damage development in Cottonid due to quasi-static tensile loading.
Materials 13 (9), 2180 (2020) 1-12. https://doi.org/10.3390/ma13092180 - Download

327) Scholz, R.; Langhansl, M.; Zollfrank, C.; Walther, F.:
Humidity-sensing material Cottonid - Microstructural tuning for improved actuation and fatigue performance.
Frontiers in Materials 7, 156 (2020) 1-10. https://doi.org/10.3389/fmats.2020.00156

326) Nebe, M.; Asijee, T.; Braun, C.; Van Campen, J.M.J.F.; Walther, F.:
Experimental and analytical analysis on the stacking sequence of composite pressure vessels.
Composite Structures 247, 112429 (2020) 1-8. https://doi.org/10.1016/j.compstruct.2020.112429

325) Awd, M.; Labanie, F.; Möhring, K.; Fatemi, A.; Walther, F.:
Towards deterministic computation of internal stresses in additively manufactured materials under fatigue loading: Part I.
Materials 13 (10), 2318 (2020) 1-15. https://doi.org/10.3390/ma13102318 - Download

324) Afzal, M. J.; Maqbool, F.; Hajavifard, R.; Buhl, J.; Walther, F.; Bambach, M.:
Modeling the residual stresses induced in the metastable austenitic stainless steel disc springs manufactured by incremental sheet forming by a combined hardening model with phase transformation.
Procedia Manufacturing 47 (2020) 1410-1415. https://doi.org/10.1016/j.promfg.2020.04.300

323) Barbeck, M.; Kühnel, L.; Witte, F.; Pissarek, J.; Precht, C.; Xiong, X.; Krastev, R.; Wegner, N.; Walther, F.; Jung, O.:
Degradation, bone regeneration and tissue response of an innovative volume stable magnesium-supported GBR/GTR barrier membrane.
International Journal of Molecular Sciences 21, 3098 (2020) 1-22. https://doi.org/10.3390/ijms21093098 - Download

322) Awd, M.; Johannsen, J.; Chan, T.; Merghany, M.; Emmelmann, C.; Walther, F.:
Improvement of fatigue strength in lightweight selective laser melted alloys by in-situ and ex-situ composition and heat treatment.
TMS 2020 149th Annual Meeting and Exhibition, Supplemental Proceedings, Springer International Publishing Cham (2020) 115-126. https://doi.org/10.1007/978-3-030-36296-6_11

321) Aeran, A.; Acosta, R.; Siriwardane, S.; Starke, P.; Mikkelsen, O.; Langen, I.; Walther, F.:
A nonlinear fatigue damage model: Comparison with experimental damage evolution of S355 (SAE 1020) structural steel and application to offshore jacket structures.
International Journal of Fatigue 135 (2020) 105568 1-9. https://doi.org/10.1016/j.ijfatigue.2020.105568

320) Senatov, F., Amanbek, G., Orlova, P., Bartov, M., Grunina, T., Kolesnikov, E., Maksimkin, A., Kaloshkin, S.D., Poponova, M., Nikitin, K., Krivozubov, M., Strukova, N., Manskikh, V., Anisimova, N., Kiselevskiy, M., Scholz, R., Knyazeva, M., Walther, F., Lunin, V., Gromov, A., Karyagina, A.:
Biomimetic UHMWPE/HA scaffolds with rhBMP-2 and erythropoietin for reconstructive surgery.
Materials Science & Engineering C, (2020) 110750 1-14. https://doi.org/10.1016/j.msec.2020.110750

319) Rojas-Sanchez, J.F.; Schmack, T.; Boesl, B.; Bjekovic, R.; Walther, F.:
Strain rate-dependent characterization of carbon fibre-reinforced composite laminates using four-point bending tests.
Journal of Reinforced Plastics and Composites 5-6, 39 (2020) 165-174. https://doi.org/10.1177/0731684419879235

318) Teschke, M.; Koch, A.; Walther, F.:
Comparison of high-temperature compression and compression-compression fatigue behavior of magnesium alloys DieMag422 and AE42.
Materials 13 (3), 497 (2020) 1-15. https://doi.org/10.3390/ma13030497 - Download

317) Bulygina, I.; Senatov, F.; Choudhary, R.; Kolesnikov, E.; Kaloshkin, S.; Scholz, R.; Knyazeva, M.; Walther, F.; Anisimova, N.; Kiselevskiy, M.:
Biomimetic scaffold fabricated with a mammalian trabecular bone template.
Polymer Degradation and Stability, 172 (2020) 109076 1-9. https://doi.org/10.1016/j.polymdegradstab.2020.109076

316) Wegner, N.; Scholz, R.; Knyazeva, M.; Walther, F.:
Service life characterization of orthopedic implant material made of ultra-high molecular weight polyethylene under physiological conditions.
Journal of the Mechanical Behavior of Biomedical Materials 104, 103617 (2020) 1-8. https://doi.org/10.1016/j.jmbbm.2020.103617

315) Samfaß, L.; Baak, N.; Meya, R.; Hering, O.; Tekkaya, A.E.; Walther, F.:
Micro-magnetic damage characterization of bent and cold forged parts.
Production Engineering Research and Development 14 (2020) 1, 77-85. https://doi.org/10.1007/s11740-019-00934-y

314) Wang, S.; Dunlap, A.; Möhring, K.; Lohmar, J.; Schwedt, A.; Aretz, A.; Walther, F.; Hirt, G.:
Torsion plastometer trials to investigate the effect of non-proportional loading paths in caliber rolling on damage and performance of metal parts.
Production Engineering Research and Development 14 (2020) 1, 17-32. https://doi.org/10.1007/s11740-019-00949-5

313) Liebsch, C.; Möhring, K.; Lohmar, J.; Walther, F.; Hirt, G.:
Investigation on the influence of damage on the fatigue strength of hot rolled sheet metal.
Production Engineering Research and Development 14 (2020) 1, 65-75. https://doi.org/10.1007/s11740-019-00933-z

312) Langenfeld, K.; Schowtjak, A.; Schulte, R.; Hering, O.; Möhring, K.; Clausmeyer, T.; Ostwald, R.; Walther, F.; Tekkaya, A.E.; Mosler, J.:
Influence of anisotropic damage evolution on cold forging.
Production Engineering Research and Development 14 (2020) 1, 115-121. https://doi.org/10.1007/s11740-019-00942-y

311) Awd, M.; Siddique, S.; Walther, F.:
Microstructural damage and fracture mechanisms of selective laser melted Al-Si alloys under fatigue loading.
Theoretical and Applied Fracture Mechanics 106 (2020) 102483 1-9. https://doi.org/10.1016/j.tafmec.2020.102483

310) Stern, F.; Grabienski, F.; Walther, F.; Boes, J.; Röttger, A.; Theisen, W.:
Influence of powder nitriding on the mechanical behavior of laser-powder bed fusion processed tool steel X30CrMo7-2.
Materials Testing 32 (2020) 1, 19-26. https://doi.org/10.3139/120.111446 - Download

309) Kotzem, D.; Arold, T.; Niendorf, T.; Walther, F.:
Damage tolerance evaluation of E-PBF-manufactured Inconel 718 strut geometries by advanced characterization techniques.
Materials 13 (1), 247 (2020) 1-21. https://doi.org/10.3390/ma13010247 - Download

308) Hülsbusch, D.; Kohl, A.; Striemann, P.; Niedermeier, M.; Strauch, J.; Walther, F.:
Development of an energy-based approach for optimized frequency selection for fatigue testing on polymers - Exemplified on polyamide 6.
Polymer Testing 81 (2020) 106260 1-8. https://doi.org/10.1016/j.polymertesting.2019.106260

307) Kotzem, D.; Arold, T.; Niendorf, T.; Walther, F.:
Influence of specimen position on the build platform on the mechanical properties of as-built direct aged electron beam melted Inconel 718 alloy.
Materials Science and Engineering: A 772 (2020) 138785 1-13. https://doi.org/10.1016/j.msea.2019.138785

306) Stern, F.; Tenkamp, J.; Walther, F.:
Non-destructive characterization of process-induced defects and their effect on the fatigue behavior of austenitic steel 316L made by laser-powder bed fusion.
Progress in Additive Manufacturing 5 (2020) 287-294. https://doi.org/10.1007/s40964-019-00105-6

305) Kotzem, D.; Dumke, P.; Sepehri, P.; Tenkamp, J.; Walther, F.:
Effect of miniaturization and surface roughness on the mechanical properties of the electron beam melted superalloy Inconel®718.
Progress in Additive Manufacturing 5 (2020) 267-276. https://doi.org/10.1007/s40964-019-00101-w

304) Nickel, J.; Baak, N.; Walther, F.; Biermann, D.:
Influence of the feed rate in the single-lip deep hole drilling process on the surface integrity of steel components.
Advanced Surface Enhancement. INCASE 2019. Lecture Notes in Mechanical Engineering. Editors: Itoh S., Shukla S., Springer, Singapore (2020) 198-212. https://doi.org/10.1007/978-981-15-0054-1_21

303) Baak, N.; Nickel, J.; Starke, P.; Biermann, D.; Walther, F.:
Qualification of an inner surface Barkhausen noise sensor for residual stress measurements of single-lip deep drilled AISI 4140 by means of X-ray diffraction.
ICBM 13, Proceedings of the 13th International Conference on Barkhausen Noise and Micromagnetic Testing, (2019) 1-8.

302) Teschke, M.; Rozo Vasquez, J; Baak, N.; Samfaß, L.; Walther, F.:
Characterization of forming-induced damage of bent and hot flat rolled DP800 steel sheets by micromagnetic testing.
ICBM 13, Proceedings of the 13th International Conference on Barkhausen Noise and Micromagnetic Testing, (2019) 1-9.

301) Strodick, S.; Schmidt, R.; Zabel, A.; Biermann, D.; Walther, F.:
Evaluation of surface integrity after BTA deep-hole drilling of AISI 4140 by means of Barkhausen noise analysis.
ICBM 13, Proceedings of the 13th International Conference on Barkhausen Noise and Micromagnetic Testing, (2019) 1-7.

300) Langenfeld, K.; Möhring, K.; Walther, F.; Mosler, J.:
On the regularization for ductile damage models.
PAMM·Proceedings in Applied Mathematics and Mechanics 19, 1 (2019) 1-4. https://doi.org/10.1002/pamm.201900003 - Download

299) Gerbe, S.; Tenkamp, J.; Scherbring, S.; Bleicher, K.; Krupp, U.; Michels, W.; Walther, F.:
Microstructural influences on the fatigue crack initiation and propagation mechanisms in hypo-eutectic Al-Si cast alloys.
Procedia Structural Integrity 23 (2019) 511-516. https://doi.org/10.1016/j.prostr.2020.01.137

298) Langenfeld, K.; Möhring, K.; Walther, F.; Mosler, J.:
Regularizational approach for modeling ductile damage.
ICMFF12 - 12th International Conference on Multiaxial Fatigue and Fracture 300 (2019) 08008 1-8. https://doi.org/10.1051/matecconf/201930008008

297) Strodick, S.; Walther, F.; Schmidt, R.; Zabel, A.; Biermann, D.:
Analyse des Eigenspannungszustands in der Bohrungsrandzone tiefgebohrter Probekörper aus 42CrMo4+QT und X5CrNi18-10.
Werkstoffprüfung 2019 - Fortschritte in der Werkstoffprüfung für Forschung und Praxis, Hrsg.: H.-J. Christ, ISBN 978-3-88355-418-1 (2019) 287-292.

296) Wegner, N.; Kotzem, D.; Walther, F.:
Korrosions- und Korrosionsermüdungsverhalten der additiv gefertigten Magnesiumlegierung WE43 für biomedizinische Anwendungen.
Werkstoffprüfung 2019 - Fortschritte in der Werkstoffprüfung für Forschung und Praxis, Hrsg.: H.-J. Christ, ISBN 978-3-88355-418-1 (2019) 161-166.

295) Acosta, R.; Boller, C.; Starke, P.; Jamrozy, M.; Knyazeva, M.; Walther, F.; Heckmann, K.; Sievers, J.; Schopf, T.; Weihe, S.:
Non-destructive testing derived parameters for microstructure-based residual service life assessment of aging metallic materials in nuclear engineering.
Materials Testing 61/11 (2019) 1029-1038. https://doi.org/10.3139/120.111417 - Download

294) Kotzem, D.; Beermann, L.; Awd, M.; Walther, F.:
Mechanical and microstructural characterization of arc-welded Inconel 625 alloy.
Materials 12 (22), 3690 (2019) 1-10. https://doi.org/10.3390/ma12223690 - Download

293) Kotzem, D.; Tenkamp, J.; Walther, F.:
Bestimmung der Schadenstoleranz von im Elektronenstrahlschmelzverfahren hergestellten Inconel 718-Stegproben unter Schwingbeanspruchung.
4. Tagung des DVM-AK Additiv gefertigte Bauteile und Strukturen, Hrsg.: H.-A. Richard, DVM e.V., ISSN 2509-8772 (2019) 129-137.

292) Awd, M.; Merghany, M.; Johannsen, J.; Emmelmann, C.; Walther, F.:
Microstructural damage and fracture mechanisms of selective laser melted AlSi10Mg alloy under cyclic loading.
Proceedings of the 1st European Conference on Structural Integrity of Additively Manufactured Materials (2019) 1-6.

291) Awd, M.; Merghany, M.; Siddique, S.; Walther, F.:
Simulation-based investigation of statistical fatigue strength of selective laser melted lightweight alloys.
Sim-Am 2019, Proceedings of the 2nd International Conference on Simulation for Additive Manufacturing (2019) 262-273.

290) Barbeck, M.; Jung, O.; Xiong, X.; Krastev, R.; Korzinskas, T.; Najman, S.; Radenkovic, M.; Wegner, N.; Knyazeva, M.; Walther, F.:
Balancing purification and ultrastructure of naturally derived bone blocks for bone regeneration: Report of the purification effort of two bone blocks.
Materials 12 (19), 3234 (2019) 1-13. https://doi.org/10.3390/ma12193234 - Download

289) Jung, O.; Porchetta, D.; Schroeder, M.-L.; Klein, M.; Wegner, N.; Walther, F.; Feyerabend, F.; Barbeck, M.; Kopp, A.:
In vivo simulation of magnesium degradability using a new fluid dynamic bench testing approach.
International Journal of Molecular Sciences 20 (19), 4859 (2019) 1-14. https://doi.org/10.3390/ijms20194859 - Download

288) Kotzem, D.; Stern, F.; Walther, F.:
Bestimmung quasistatischer Druckeigenschaften bei Raum- und Hochtemperatur an additiv gefertigten Miniaturproben.
Additive Fertigung von Bauteilen und Strukturen. Springer Vieweg, ISBN 978-3-658-27411-5 (2019) 145-156. https://doi.org/10.1007/978-3-658-27412-2_9

287) Wegner, N.; Kotzem, D.; Wessarges, Y.; Emminghaus, N.; Hoff, C.; Tenkamp, J.; Hermsdorf, J.; Overmeyer, L.; Walther, F.:
Corrosion and corrosion fatigue properties of additively manufactured magnesium alloy WE43 in comparison to titanium alloy Ti-6Al-4V in physiological environment.
Materials 12 (18), 2892 (2019) 1-24. https://doi.org/10.3390/ma12182892 - Download

286) Zoch, H.-W.; Uhlenwinkel, V.; Schulz, A.; Cui, C.; Theisen, W.; Röttger, A.; Boes, J.; Walther, F.; Tenkamp, J.; Stern, F.:
High-alloyed steel powders with increased nitrogen content for laser additive manufacturing.
Proceedings of the 11th International Conference on Tooling (2019) 1-8.

285) Baak, N.; Nickel, J.; Biermann, D.; Walther, F.:
Barkhausen noise-based fatigue life prediction of deep drilled AISI 4140.
Procedia Structural Integrity 18 (2019) 274-279. https://doi.org/10.1016/j.prostr.2019.08.164

284) Hülsbusch, D.; Mrzljak, S.; Walther, F.:
In situ computed tomography for the characterization of the fatigue damage development in glass fiber-reinforced polyurethane.
Materials Testing 61, 9 (2019) 821-828. https://doi.org/10.3139/120.111389 - Download

283) Hülsbusch, D.; Kohl, A.; Mrzljak, S.; Fehrenbacher, U.; Emig, J.; Striemann, P.; Niedermeier, M.; Walther, F.:
An energy rate approach for optimized frequency selection for reproducible fatigue assessment of composites.
ICCM22, Proceedings of the 22nd International Conference on Composite Materials (2019) 1-8.

282) Striemann, P.; Hülsbusch, D.; Mrzljak, S.; Niedermeier, M.; Walther, F.:
Effective tensile strength of additively manufactured discontinuous carbon fiber-reinforced polymer via computed tomography.
ICCM22, Proceedings of the 22nd International Conference on Composite Materials (2019) 1-9.

281) Myslicki, S.; Bletz-Mühldorfer, O.; Diehl, F.; Lavarec, C.; Vallée, T.; Scholz, R.; Walther, F.:
Fatigue of glued-in rods in engineered hardwood products - Part I: Experimental results.
The Journal of Adhesion 95, 5-7 (2019) 675-701. https://doi.org/10.1080/00218464.2018.1555477

280) Myslicki, S.; Walther, F.; Bletz-Mühldorfer, O.; Diehl, F.; Lavarec, C.; Beber, V.C.; Vallée, T.:
Fatigue of glued-in rods in engineered hardwood products - Part II: Numerical modelling.
The Journal of Adhesion 95, 5-7 (2019) 702-722. https://doi.org/10.1080/00218464.2018.1555478

279) Grunwald, C.; Vallée, T.; Fecht, S.; Bletz-Mühldorfer, O.; Diehl, F.; Bathon, L.; Myslicki, S.; Scholz, R.; Walther, F.:
Rods glued in engineered hardwood products part I: Experimental results under quasi-static loading.
International Journal of Adhesion and Adhesives 90 (2019) 163-181. https://doi.org/10.1016/j.ijadhadh.2018.05.003

278) Grunwald, C.; Vallée, T.; Fecht, S.; Bletz-Mühldorfer, O.; Diehl, F.; Bathon, L.; Myslicki, S.; Scholz, R.; Walther, F.:
Rods glued in engineered hardwood products part II: Numerical modelling and capacity prediction.
International Journal of Adhesion and Adhesives 90 (2019) 182-198. https://doi.org/10.1016/j.ijadhadh.2018.05.004

277) Koch, A.; Wittke, P.; Walther, F.:
Computed tomography-based characterization of the fatigue behavior and damage development of extruded profiles made from recycled AW6060 aluminum chips.
Materials 12 (15), 2372 (2019) 1-17. https://doi.org/10.3390/ma12152372 - Download

276) Koch, A.; Henkel, T.; Walther, F.:
Characterization of the anisotropy of extruded profiles based on recycled AW6060 aluminum chips.
ICSID 2019, Proceedings of the 3rd International Conference on Structural Integrity and Durability (2019) 1-5.

275) Stern, F.; Kleinhorst, J.; Tenkamp, J.; Walther, F.:
Investigation of the anisotropic cyclic damage behavior of selective laser melted AISI 316L stainless steel.
Fatigue and Fracture of Engineering Materials and Structures 42 (2019) 2422-2430. https://doi.org/10.1111/ffe.13029

274) Biswal, R.; Zhang, X.; Shamir, M.; Al Mamun, A.; Awd, M.; Walther, F.; Syed, A.:
Interrupted fatigue testing with periodic tomography to monitor porosity defects in wire + arc additive manufactured Ti-6Al-4V.
Additive Manufacturing 8 (2019) 517-527. https://doi.org/10.1016/j.addma.2019.04.026

273) Striemann, P.; Hülsbusch, D.; Niedermeier, M.; Walther, F.:
Quasi-static characterization of polyamide-based discontinuous CFRP manufactured by additive manufacturing and injection molding.
Key Engineering Materials 809, ISSN 1662-9795 (2019) 386-391. https://doi.org/10.4028/www.scientific.net/KEM.809.386

272) Nebe, M.; Maraite, D.; Braun, C.; Hülsbusch, D.; Walther, F.:
Experimental characterization of the structural deformation of type IV pressure vessels subjected to internal pressure.
Key Engineering Materials 809, ISSN 1662-9795 (2019) 47-52. https://doi.org/10.4028/www.scientific.net/KEM.809.47

271) Mrzljak, S.; Gelinski, N.; Hülsbusch, D.; Schumacher, E.; Böhm, S.; Walther, F.:
Influence of process parameters, surface topography and corrosion condition on the fatigue behavior of steel/aluminum hybrid joints produced by magnetic pulse welding.
Key Engineering Materials 809, ISSN 1662-9795 (2019) 197-202. https://doi.org/10.4028/www.scientific.net/KEM.809.197

270) Scholz, R.; Langhansl, M.; Zollfrank, C.; Walther, F.:
Cottonid - Ein leistungsfähiger Funktionswerkstoff für feuchtesensitive Aktorik.
Smarte Strukturen und Systeme - Tagungsband des 4Smarts-Symposiums, Hrsg. M. Wiedemann, T. Melz, ISBN 978-3-8440-6425-4 (2019) 63-75.

269) Schmiedt-Kalenborn, A.; Manka, M.; Tillmann, W.; Walther, F.:
Corrosion fatigue performance of brazed 304L stainless steel joints using gold-based brazing alloys.
Loet 2019, Proceedings of the 12th International Conference on Brazing, High Temperature Brazing and Diffusion Bonding, Aachen, DVS-Berichte Band 353, ISBN 978-3-96144-060-3 (2019) 96-102.

268) Hajavifard, R.; Maqbool, F.; Schmiedt-Kalenborn, A.; Buhl, J.; Bambach, M.; Walther, F.:
Integrated forming and surface engineering of disc springs by inducing residual stresses by incremental sheet forming.
Materials 12 (10), 1646 (2019) 1-19. https://doi.org/10.3390/ma12101646 - Download

267) Maqbool, F.; Hajavifard, R.; Walther, F.; Bambach, M.:
Engineering the residual stress state of the metastable austenitic stainless steel (MASS) disc springs by incremental sheet forming (ISF).
Production Engineering Research and Development 13 (2019) 139-148. https://doi.org/10.1007/s11740-018-0864-6

266) Maqbool, F.; Hajavifard, R.; Walther, F.; Bambach, M.:
Experimental investigation and finite element modelling of residual stress control in disc springs made of metastable austenitic stainless steel (MASS) using incremental sheet forming (ISF).
Procedia Manufacturing 29 (2019) 12-20. https://doi.org/10.1016/j.promfg.2019.02.099

265) Wittke, P.; Klein, M.; Walther, F.:
Mechanism-oriented characterization of the load direction-dependent cyclic creep behavior of the magnesium alloys Mg-4Al-2Ba-2Ca and AE42 at room temperature.
Engineering Failure Analysis 103 (2019) 124-131. https://doi.org/10.1016/j.engfailanal.2019.04.063

264) Maci, F.; Jamrozy, M.; Acosta, R.; Starke, P.; Boller, C.; Heckmann, K.; Sievers, J.; Schopf, T.; Walther, F.:
Characterization of the fatigue behavior of mechanical and thermal aged austenitic power plant steel AISI 347.
Structural Integrity 7 - Mechanical Fatigue of Metals: Experimental and Simulation Perspectives, Editors: Correia, J.; De Jesus, A.; Fernandes, A.; Calçada, R., Springer, Cham, ISBN 978-3-030-13979-7 (2019) 65-71. https://doi.org/10.1007/978-3-030-13980-3_9

263) Baak, N.; Nickel, J.; Biermann, D.; Walther, F.:
Micromagnetic-based fatigue life prediction of single-lip deep drilled AISI 4140.
Structural Integrity 7 - Mechanical Fatigue of Metals: Experimental and Simulation Perspectives, Editors: Correia, J.; De Jesus, A.; Fernandes, A.; Calçada, R., Springer, Cham, ISBN 978-3-030-13979-7 (2019) 19-25. https://doi.org/10.1007/978-3-030-13980-3_3

262) Koch, A.; Wittke, P.; Walther, F.:
Characterization of the fatigue and damage behavior of extruded AW6060 aluminum chip profiles.
Structural Integrity 7 - Mechanical Fatigue of Metals: Experimental and Simulation Perspectives, Editors: Correia, J.; De Jesus, A.; Fernandes, A.; Calçada, R., Springer, Cham, ISBN 978-3-030-13979-7 (2019) 11-17. https://doi.org/10.1007/978-3-030-13980-3_2

261) Salmen, B.T.; Knyazeva, M.; Walther, F.:
Development of a structural integrity non-destructive inspection system for bridges made of weathering steel.
ICBMM 2018, Matec Web of Conferences 278, 03006 (2019) 1-5. https://doi.org/10.1051/matecconf/201927803006

260) Hemmerich, M.; Scholz, R.; Saha, S.; Walther, F.; Meyer, J.:
Polylactid - ein geeigneter Biokunststoff für optische Anwendungen? - Versuchsaufbau zur zeitgerafften optischen und thermischen Alterung.
Sonderpublikation/special issue chrom+food FORUM 2019, 03 (2019) 43-45.

259) Schmiedt-Kalenborn, A.; Lingnau L. A.; Manka, M.; Tillmann, W.; Walther, F.:
Fatigue and corrosion fatigue behaviour of brazed stainless steel joints AISI 304L/BAu-4 in synthetic exhaust gas condensate.
Materials 12 (7), 1040 (2019) 1-14. https://doi.org/10.3390/ma12071040 - Download

258) Tenkamp, J.; Bleicher, K.; Klute, S. Chrzan, K.; Koch, A.; Walther, F.:
Advanced characterization of the cyclic deformation and damage behavior of Al-Si-Mg cast alloys using hysteresis analysis and alternating current potential drop method.
Light Metals 2019, Hrsg.: C. Chesonis, Springer, ISBN 978-3-030-05864-7 (2019) 167-175. https://doi.org/10.1007/978-3-030-05864-7

257) Schmiedt, A.; Manka, M.; Tillmann, W.; Walther, F.:
Local quasi-static and cyclic deformation behaviour of brazed AISI 304L/BAu-4 joints characterised by digital image correlation.
Weld World 63 (2019) 501-509. https://doi.org/10.1007/s40194-018-00693-x

256) Scholz, R.; Langhansl, M.; Zollfrank, C.; Walther, F.:
Experimental study on the actuation and fatigue behavior of the biopolymeric material Cottonid.
Materials Today: Proceedings 7 (2019) 476-483. https://doi.org/10.1016/j.matpr.2018.11.112

255) Awd, M.; Siddique, S.; Johannsen, J.; Emmelmann, C.; Walther, F.:
Very high-cycle fatigue properties and microstructural damage mechanisms of selective laser melted AlSi10Mg alloy.
International Journal of Fatigue 124 (2019) 55-69. https://doi.org/10.1016/j.ijfatigue.2019.02.040

254) Syed, A.; Awd, M.; Walther, F.; Zhang, X.:
Microstructure and mechanical properties of as-built and heat-treated electron beam melted Ti-6Al-4V.
Materials Science and Technology (2019) 1-8. https://doi.org/10.1080/02670836.2019.1580434

253) Biswal, R.; Zhang, X.; Syed, A.; Awd, M.; Ding, J.; Walther, F.; Williams, S.:
Criticality of porosity defects on the fatigue performance of wire + arc additive manufactured titanium alloy.
International Journal of Fatigue 122 (2019) 208-217. https://doi.org/10.1016/j.ijfatigue.2019.01.017

252) Tillmann, W.; Walther, F.; Manka, M.; Schmiedt, A.; Wojarski, L.; Eilers, A.; Reker, D.:
Investigations of the corrosion damage process of the brazed joint AISI 304L/BNi-2.
Results in Physics 1, (2019), 1245-1252. https://doi.org/10.1016/j.rinp.2018.12.074

251) Jung, O.; Smeets, R.; Hartjen, P.; Schnettler, R.; Feyerabend, F.; Klein, M.; Wegner, N.; Walther, F.; Stangier, D.; Henningsen, A.; Rendenbach, C.; Heiland, M.; Barbeck, M.; Kopp, A.:
Improved in vitro test procedure for full assessment of the cytocompatibility of degradable magnesium based on ISO 10993-5/-12.
International Journal of Molecular Sciences 20 (2), 255 (2019) 1-20. https://doi.org/10.3390/ijms20020255 - Download

 

2017 - 2018

250) Scholz, R.; Wegner, N.; Porchetta, D.; Knyazeva, M.; Walther, F.:
Novel in vitro test for characterizing the long-term resistance of UHMWPE as implant material.
Skriptsammlung des DVM-AK „Zuverlässigkeit von Implantaten und Biostrukturen“, (2018) 1-17.

249) Nickel, J.; Baak, N.; Biermann, D.; Walther, F.:
Einfluss des Tiefbohrens auf die Schwingfestigkeit von Bauteilen aus Vergütungsstahl 42CrMo4+QT.
wt Werkstattstechnik online 108, 11/12 (2018), 767-772.

248) Tillmann, W.; Walther, F.; Luo, W.; Haack, M.; Nellesen, J.; Knyazeva, M.:
In situ acoustic monitoring of thermal spray process using high-frequency impulse measurements.
Journal of Thermal Spray Technology 27 (2018), 50-58. https://doi.org/10.1007/s11666-017-0673-z

247) Tillmann, W.; Luo, W.; Zajaczkowski, J.; Walther, F.; Möhring, K.; Haack, M.:
Akustische In-situ-Überwachung von Schichtbildungsprozessen beim thermischen Sprizten durch Hochfrequenzimpuls-messung.
Thermal Spray Bulletin 70 (2018) 1, 46 - 53.

246) Minakov, A.; Plokhikh, A.; Schmiedt, A.; Walther, F.:
Comparative analysis of the fatigue characteristics of multilayer steel materials and nanolaminates.
AIP Conference Proceedings 2053 (1), 040059 (2018) 1-4. https://doi.org/10.1063/1.5084497

245) Bletz-Mühldorfer, O.; Diehl, F.; Bathon, L.; Myslicki, S.; Scholz, R.; Walther, F.; Grunwald, C.; Vallée, T.:
Load-bearing behavior of rods glued in hardwood.
Adhesion Adhesives + Sealants 4 (2018) 10-13.

244) Klein, M.; Walther, F.:
Electrochemical-based characterization of the corrosion fatigue behavior of creep-resistant magnesium alloys DieMag422 and AE42.
Materials Science Forum 941 (2018), 1728-1733. https://doi.org/10.4028/www.scientific.net/MSF.941.1728

243) Klein, M.; Wittke, P.; Walther, F.:
Mikrostrukturbasierte Charakterisierung des beanspruchungsrichtungsabhängigen zyklischen Kriechverhaltens der Magnesiumlegierungen DieMag422 und AE42.
Werkstoffprüfung 2018 - Werkstoffe und Bauteile auf dem Prüfstand, Hrsg.: G. Moninger, Stahleisen, ISBN 978-3-941269-99-6 (2018) 87-92.

242) Jamrozy, M.; Scholz, R.; Walther, F.; Bletz-Mühldorfer, O.; Bathon, L.:
Optimierung des Druckverlaufs von Schraubenpressklebungen für den Holzbau.
Werkstoffprüfung 2018 - Werkstoffe und Bauteile auf dem Prüfstand, Hrsg.: G. Moninger, Stahleisen, ISBN 978-3-941269-99-6 (2018) 255-260.

241) Starke, P.; Acosta, R.; Boller, C.; Maci, F.; Walther, F.; Heckmann, K.; Sievers, J.:
StrainLife: Lebensdauerberechnung metallischer Werkstoffe und Komponenten der Energietechnik.
Werkstoffprüfung 2018 - Werkstoffe und Bauteile auf dem Prüfstand, Hrsg.: G. Moninger, Stahleisen, ISBN 978-3-941269-99-6 (2018) 81-86.

240) Maci, F.; Walther, F.; Starke, P.; Acosta, R.; Boller, C.; Heckmann, K.; Sievers, J.; Schopf, T.:
Quantitative Bewertung des Ermüdungs- und Schädigungsstadiums des in Kraftwerken eingesetzten Stahls X6CrNiNb18-10.
Werkstoffprüfung 2018 - Werkstoffe und Bauteile auf dem Prüfstand, Hrsg.: G. Moninger, Stahleisen, ISBN 978-3-941269-99-6 (2018) 75-80.

239) Samfaß, L.; Walther, F.:
Einfluss umformtechnisch induzierter Schädigung auf das Ermüdungsverhalten und die magnetischen Werkstoffeigenschaften des Stahls 16MnCrS5.
Werkstoffprüfung 2018 - Werkstoffe und Bauteile auf dem Prüfstand, Hrsg.: G. Moninger, Stahleisen, ISBN 978-3-941269-99-6 (2018) 39-44.

238) Nebe, M.; Braun, C.; Gebhardt, T.; Hülsbusch, D.; Walther, F.:
Optische und akustische Analyse der Schadens- und Versagensmechanismen in CFK-Druckbehältern.
Werkstoffprüfung 2018 - Werkstoffe und Bauteile auf dem Prüfstand, Hrsg.: G. Moninger, Stahleisen, ISBN 978-3-941269-99-6 (2018) 113-118.

237) Schmiedt, A.; Lingnau, L. A.; Manka, M.; Tillmann, W.; Walther, F.:
Effect of condensate corrosion on tensile and fatigue properties of brazed AISI 304L stainless steel joints using gold-base filler metal.
Procedia Structural Integrity 13 (2018) 22-27. https://doi.org/10.1016/j.prostr.2018.12.004

236) Wittke, P.; Teschke, M.; Walther, F.:
Mechanical characterization of friction drilled internal threads in AZ91 profiles.
International Journal of Advanced Manufacturing Technology 99, 9-12 (2018) 3111-3122. https://doi.org/10.1007/s00170-018-2698-y

235) Knyazeva, M.; Rozo Vasquez, J., Gondecki, L.; Weibring, M.; Pöhl, F.; Kipp, M.; Tenberge, P.; Theisen, W; Walther, F.; Biermann, D.:
Micro-magnetic and microstructural characterization of wear progress on case-hardened 16MnCr5 gear wheels.
Materials 11(11), 2290 (2018) 1-17. https://doi.org/10.3390/ma11112290 - Download

234) Stern, F.; Kleinhorst, J.; Tenkamp, J.; Walther, F.:
Einfluss der Baurichtung beim selektiven Laserschmelzen (SLM) auf das Ermüdungsverhalten des austenitischen Stahls AISI 316L.
3. Tagung des DVM-AK Additiv gefertigte Bauteile und Strukturen, Hrsg.: H.-A. Richard, DVM e.V., ISSN 2509-8772 (2018) 49-56.

233) Bletz-Mühldorfer, O.; Diehl, F.; Bathon, L.; Myslicki, S.; Scholz, R.; Walther, F.; Grunwald, C.; Vallée, T.:
Traglastverhalten von eingeklebten Stäben in Laubhölzern.
adhäsion KLEBEN & DICHTEN 10 (2018) 46-49.

232) Awd, M.; Siddique, S.; Johannsen, J.; Wiegold, T.; Klinge, S.; Emmelmann, C.; Walther, F.:
Quality assurance of additively manufactured alloys for aerospace industry by non-destructive testing and numerical modeling.
Proceedings of the 10th International Conference on Non-destructive Testing in Aerospace (2018) 1-10.Download

231) Siddique, S.; Awd, M.; Wiegold, T.; Klinge, S.; Walther, F.:
Simulation of cyclic deformation behavior of selective laser melted and hybrid-manufactured aluminum alloys using the phase-field method.
Applied Sciences 8 (10), 1948 (2018) 1-18. https://doi.org/10.3390/app8101948 - Download

230) Schumacher, E.; Kuemper, S.; Gelinski, N.; Hülsbusch, D.; Walther, F.; Böhm, S.:
Bessere Ermüdungseigenschaften durch optimierte magnetimpulsgeschweißte Stahl/Aluminium-Hybridverbindungen.
DVS CONGRESS, Proceedings of the DVS CONGRESS 2018 (2018) 1-6.

229) Wittke, P.; Klein, M.; Walther, F.:
Mechanism-oriented characterization of the load direction-dependent cyclic creep behavior of the magnesium alloy Mg-4Al-2Ba-2Ca.
ICSID 2018, Proceedings of the 2nd International Conference on Structural Integrity and Durability (2018) 1-5.

228) Awd, M.; Stern, F.; Kampmann, A.; Kotzem, D.; Tenkamp, J.; Walther, F.:
Microstructural characterization of the anisotropy and cyclic deformation behavior of selective laser melted AlSi10Mg structures.
Metals 8 (10), 825 (2018) 1-14. https://doi.org/10.3390/met8100825 - Download

227) Schmiedt, A.; Lücker, L.; Manka, M.; Tillmann, W.; Walther, F.:
Frequency-dependent fatigue and corrosion fatigue assessment of brazed AISI 304L/BNi-2 joints in air and synthetic exhaust gas condensate.
Fatigue and Fracture of Engineering Materials and Structures 41 (2018) 2338-2349. https://doi.org/10.1111/ffe.12902

226) Baak, N.; Schaldach, F.; Nickel, J.; Biermann, D.; Walther, F.:
Barkhausen noise assessment of the surface conditions due to deep hole drilling and their influence on the fatigue behaviour of AISI 4140.
Metals 8 (9), 720 (2018) 1-12. https://doi.org/10.3390/met8090720 - Download

225) Wilms, M. B.; Streubel, R.; Frömel, F.; Weisheit, A.; Tenkamp, J.; Walther, F.; Barcikowski, S.; Schleifenbaum, J. H.; Gökce, B.:
Laser additive manufacturing of oxide dispersion strengthened steels using laser-generated nanoparticle-metal composite powders.
Procedia CIRP 74 (2018) 196-200. https://doi.org/10.1016/j.procir.2018.08.093

224) Striemann, P.; Eichenhofer, M.; Schupp, D.; Niedermeier, M.; Hülsbusch, D.; Walther, F.:
Compression testing of additively manufactured continuous carbon fiber-reinforced sandwich structures.
Materials Testing 60, 9 (2018) 801 - 808. https://doi.org/10.3139/120.111216 - Download

223) Acosta, R.; Starke, P.; Boller, C.; Jamrozy, M.; Klein, M.; Knyazeva, M.; Walther, F.; Heckmann, K.; Sievers, J.; Schopf, T.; Schuler, X.:
Nutzung zerstörungsfreier Prüfverfahren zur mikrostrukturbasierten Restlebensdauerbewertung alternder metallischer Werkstoffe und Komponenten in der Energietechnik.
DGZfP-Jahrestagung (2018) 1-12.

222) Schmiedt, A.; Manka, M.; Tillmann, W.; Walther, F.:
Local deformation behaviour of brazed AISI 304L/BAu-4 joints in tensile and fatigue tests measured by digital image correlation.
IIW 2018, 71th IIW Annual Assembly and International Conference, Doc XVIIA-0126-18 (2018) 1-10.

221) Nickel, J.; Baak, N.; Biermann, D.; Walther, F.:
Untersuchungen zum Einfluss der spanenden Bearbeitung und des Schwefelgehalts auf die Schwingfestigkeit des Vergütungsstahls 42CrMo4+QT.
Werkstoffe in der Fertigung, 4 (2018) 30-31.

220) Starke, P.; Walther, F.; Eifler, D.:
Model-based correlation between change of electrical resistance and change of dislocation density of fatigue-loaded ICE R7 wheel steel specimens.
Materials Testing 60, 7-8 (2018) 669-677. https://doi.org/10.3139/120.111202 - Download

219) Frömel, F.; Kleinhorst, J.; Tenkamp, J.; Walther, F.:
Influence of process-induced anisotropy and defects on the fatigue behavior of additively manufactured austenitic steel 316L.
NT2F18, Proceedings of the 18th International Conference on New Trends in Fatigue and Fracture, Ed.: L. Reis, M. Freitas, V. Anes, ISBN 978-989-20-8548-7 (2018) 189-192.

218) Awd, M.; Siddique, S.; Hajavifard, R.; Walther, F.:
Comparative study of defect-based and plastic damage-based approaches for fatigue lifetime calculation of selective laser-melted AlSi12.
FFW 2018, Proceedings of the 7th International Conference on Fracture Fatigue and Wear (2018) 297-313. https://doi.org/10.1007/978-981-13-0411-8_27

217) Bletz-Mühldorfer, O.; Diehl, F.; Bathon, L.; Myslicki, S.; Walther, F.; Grunwald, C.; Vallée, T.:
Ermüdungsverhalten von eingeklebten Stäben - Teil 2.
Bauen mit Holz 6 (2018) 38-43.

216) Mrzljak, S.; Hülsbusch, D.; Walther, F.:
Damage initiation and propagation in glass-fiber-reinforced polyurethane during cyclic loading analyzed by in situ computed tomography.
ICFC7, Proceedings of the 7th International Conference on Fatigue of Composites (2018) 1-9.

215) Nebe, M.; Braun, C.; Gebhardt, T.; Hülsbusch, D.; Walther, F.:
Combining optical and acoustical characterization methods to investigate damage and failure mechanisms in composite pressure vessels.
ICFC7, Proceedings of the 7th International Conference on Fatigue of Composites (2018) 1-8.

214) Nickel, J.; Baak, N.; Biermann, D.; Walther, F.:
Influence of the deep hole drilling process and sulphur content on the fatigue strength of AISI 4140 steel components.
Procedia CIRP 71 (2018) 209-214. https://doi.org/10.1016/j.procir.2018.05.069

213) Scholz, R.; Knyazeva, M.; Porchetta, D.; Wegner, N.; Senatov, F.; Salimon, A.; Kaloshkin, S.; Walther, F.:
Development of biomimetic in vitro fatigue assessment for UHMWPE implant materials.
Journal of the Mechanical Behavior of Biomedical Materials 85 (2018) 94-101. https://doi.org/10.1016/j.jmbbm.2018.05.034

212) Droste, M.; Günther, J.; Kotzem, D.; Walther, F.; Niendorf, T.; Biermann, H.:
Cyclic deformation behavior of a damage tolerant CrMnNi TRIP steel produced by electron beam melting.
International Journal of Fatigue 114 (2018) 262-271. https://doi.org/10.1016/j.ijfatigue.2018.05.031

211) Tenkamp, J.; Koch, A.; Knorre, S.; Krupp, U.; Michels, W.; Walther, F.:
Influence of the microstructure on the cyclic stress-strain behaviour and Fatigue life in hypo-eutectic Al-Si-Mg cast alloys.
Fatigue 2018, Matec Web of Conferences 165, 15004 (2018) 1-8. https://doi.org/10.1051/matecconf/201816515004

210) Schmiedt, A.; Jaquet, S.; Manka, M.; Tillmann, W.; Walther, F.:
Tensile and fatigue assessments of brazed stainless steel joints using digital image correlation.
Fatigue 2018, Matec Web of Conferences 165, 06003 (2018) 1-8. https://doi.org/10.1051/matecconf/201816506003

209) Awd, M.; Johannsen, J.; Siddique, S.; Emmelmann, C.; Walther, F.:
Qualification of selective laser-melted Al alloys against Fatigue damage by means of measurement and modeling techniques.
Fatigue 2018, Matec Web of Conferences 165, 02001 (2018) 1-7. https://doi.org/10.1051/matecconf/201816502001

208) Doñate-Buenida C.; Frömel, F.; Wilms, B.; Streubel, R.; Tenkamp, J.; Hupfeld, T.; Nachev, M.; Gökce, E.; Weisheit, A.; Barcikowski, S.; Walther, F.; Schleifenbaum, J. H.; Gökce, B.:
Oxide dispersion-strengthened alloys generated by laser metal deposition of laser-generated nanoparticle-metal powder composites.
Materials & Design 154 (2018) 360-369. https://doi.org/10.1016/j.matdes.2018.05.044

207) Tannert, T.; Zhu, H.; Myslicki, S.; Walther, F.; Valée, T.:
Tensile and fatigue investigations of timber joints with glued-in FRP rods.
The Journal of Adhesion 93, 11 (2017) 926-942. https://doi.org/10.1080/00218464.2016.1190653

206) Bletz-Mühldorfer, O.; Diehl, F.; Bathon, L.; Myslicki, S.; Walther, F.; Grunwald, C.; Vallée, T.:
Ermüdungsverhalten von eingeklebten Stäben - Teil 1.
Bauen mit Holz 5 (2018) 30-35.

205) Frömel, F.; Awd, M.; Tenkamp, J.; Walther, F.; Boes, J.; Geenen, K.; Röttger, A.; Theisen, W.:
Untersuchung des Einflusses einer HIP-Nachbehandlung auf den selektiv lasergeschmolzenen (SLM) austenitischen Stahl AISI 316L.
Werkstoffe und Additive Fertigung - Tagungsband, Hrsg: P. Hoyer, C. Leyens, T. Niendorf, V. Ploshikhin, V. Schulze, G. Witt, ISBN 978-3-88355-418-1 (2018) 190-199.

204) Gelinski, N.; Hülsbusch, D.; Schumacher, E.; Böhm, S.; Walther, F.:
Influence of process parameters on the fatigue behavior of steel/aluminum hybrid joints produced by magnetic pulse welding.
Hybrid Materials and Structures 2018, Hrsg.: J. Hausmann, M. Siebert, A. von Hehl, ISBN 978-3-88355-417-4 (2018) 278-282.

203) Schmiedt, A.; Manka, M.; Tillmann, W.; Walther, F.:
Influence of condensate corrosion on tensile and fatigue properties of brazed stainless steel joints AISI 304L/BNi-2 for automotive exhaust systems.
Materialwissenschaft und Werkstofftechnik 49, 3 (2018) 249-263. https://doi.org/10.1002/mawe.201800007

202) Hoppius, J. S., Kukreja, L. M., Knyazeva, M., Pöhl, F., Walther, F., Ostendorf, A., Gurevich, E. L.:
On femtosecond laser shock peening of stainless steel AISI 316.
Applied Surface Science 435 (2018) 1120-1124. https://doi.org/10.1016/j.apsusc.2017.11.145

201) Dörrstein, J.; Scholz, R.; Schwarz, D.; Schieder, D.; Sieber, V.; Walther, F.; Zollfrank, C.:
Dataset on the structural characterization of organosolv lignin obtained from ensiled Po-aceae grass and load-dependent molecular weight changes during thermoplastic processing.
Data in Brief 17 (2018) 647-652. https://doi.org/10.1016/j.dib.2018.01.060

200) Dörrstein, J.; Scholz, R.; Schwarz, D.; Schieder, D.; Sieber, V.; Walther, F.; Zollfrank, C.:
Effects of high-lignin-loading on thermal, mechanical, and morphological properties of bioplastic composites.
Composite Structures 189 (2018) 349-356. https://doi.org/10.1016/j.compstruct.2017.12.003

199) Schmack, T.; Filipe, T.; Deinzer, G.; Kassapoglou, C.; Walther, F.:
Experimental and numerical investigation of the strain rate-dependent compression behavior of a carbon-epoxy structure.
Composite Structures 189 (2018) 256-262. https://doi.org/10.1016/j.compstruct.2017.11.025

198) Awd, M.; Tenkamp, J.; Hirtler, M.; Siddique, S.; Bambach, M.; Walther, F.:
Comparison of microstructure and mechanical properties of Scalmalloy® produced by selective laser melting and laser metal deposition.
Materials 11, 1 (2018) 1-17. https://doi.org/10.3390/ma11010017 - Download

197) Klein, M.; Wittke, P.; Hoppe, R.; Letzig, D.; Walther, F.:
Corrosion fatigue assessment of extruded magnesium alloys AZ31 and ME20.
Materials Testing 60, 1 (2018) 15-21. https://doi.org/10.3139/120.111113 - Download

196) Tenkamp, J.; Koch, A.; Knorre, S.; Krupp, U.; Michels, W.; Walther, F.:
Defect-correlated fatigue assessment of A356-T6 aluminum cast alloy using computed tomography based Kitagawa-Takahashi diagrams.
International Journal of Fatigue 108 (2018) 25-34. https://doi.org/10.1016/j.ijfatigue.2017.11.003

195) Siddique, S.; Awd, M.; Tenkamp, J.; Walther, F.:
High and very high cycle fatigue failure mechanisms in selective laser melted aluminum alloys.
Journal of Materials Research 32, 23 (2017) 4296-4304. https://doi.org/10.1557/jmr.2017.314

194) Becker, T.; D. Hülsbusch, D.; Walther, F.:
Kurzwellen-Infrarot-Emitter-Technik zur Bewertung des Verformungs- und Schädigungsverhaltens geklebter Stahl-CFK-Hybridstrukturen.
Werkstoffprüfung 2017 - Fortschritte in der Werkstoffprüfung für Forschung und Praxis, Hrsg.: H. Frenz, J. B. Langer, Stahleisen, ISBN 978-3-9814516-7-2 (2017) 271-276.

193) Schmack, T.; Hülsbusch, D.; Rausch, J.; Roquette, D.; Deinzer, G.; Kothmann, M.; Walther, F.:
Ganzheitliche Methode zur Ermittlung und Validierung dehnratenabhängiger Kennwerte von endlosfaserverstärkten Kunststoffen.
Werkstoffprüfung 2017 - Fortschritte in der Werkstoffprüfung für Forschung und Praxis, Hrsg.: H. Frenz, J. B. Langer, Stahleisen, ISBN 978-3-9814516-7-2 (2017) 265-270.

192) Frömel, F.; Kampmann, A.; Tenkamp, J.; Walther, F.:
Einfluss der prozessinduzierten ortsabhängigen Fehlstellenverteilung auf die Strukturintegrität laseradditiv gefertigter AlSi10Mg- und AlSi12-Legierungen.
Werkstoffprüfung 2017 - Fortschritte in der Werkstoffprüfung für Forschung und Praxis, Hrsg.: H. Frenz, J. B. Langer, Stahleisen, ISBN 978-3-9814516-7-2 (2017) 135-140.

191) Baak, N.; Tenkamp, J.; Walther, F.; Garlich, M.; Bambach, M.; Weibring, M.; Tenberge, P.:
Magnetische-Barkhausen-Rauschen-Analyse zur zerstörungsfreien Produktions- und Betriebsüberwachung lokaler physikalischer Eigenschaften.
Werkstoffprüfung 2017 - Fortschritte in der Werkstoffprüfung für Forschung und Praxis, Hrsg.: H. Frenz, J. B. Langer, Stahleisen, ISBN 978-3-9814516-7-2 (2017) 129-134.

190) Klein, M.; Frieling, G.; Walther, F.:
Corrosion fatigue assessment of creep-resistant magnesium alloys DieMag422 and AE42.
Engineering Fracture Mechanics 185 (2017) 33-45. https://doi.org/10.1016/j.engfracmech.2017.02.024

189) Hülsbusch, D.; Walther, F.:
Efficient testing solutions for automotive application materials: performance capability assessment of fiber-reinforced polymers and hybrid structures.
CAA 9, Proceedings of 9th Symposium on Composite Materials for Automotive Applications, Ed.: Sampe Japan (2017) 85-96.

188) Walther, F.:
Reliability of metal- and polymer-based material systems by means of coupled destructive and non-destructive testing technologies.
CAA 9, Proceedings of 9th Symposium on Composite Materials for Automotive Applications, Ed.: Sampe Japan (2017) 77-83.

187) Awd, M.; Siddique, S.; Tenkamp, J.; Walther, F.:
Freeform characterization of fatigue strength of additively manufactured lightweight alloys through FEM and Monte-Carlo modeling.
2. Tagung des DVM-AK Additiv gefertigte Bauteile und Strukturen, Hrsg.: H.-A. Richard, DVM e.V., ISSN 2509-8772 (2017) 127-136.

186) Wittke, P.; Teschke, M.; Hannich, S.; Biermann, D.; Walther, F.:
Influence of elevated temperature on mechanical properties of friction drilled internal threads in AlSi10Mg, AZ31 and AZ91 profiles.
LightMAT 2017, Proceedings of the 2nd International Conference on Light Materials - Science and Technology (2017) 1-2.

185) Biermann, D.; Walther, F.; Hannich, S.; Wittke, P.:
Temperature controlled front face flow drilling of magnesium alloys.
LightMAT 2017, Proceedings of the 2nd International Conference on Light Materials - Science and Technology (2017) 1-2.

184) Klein, M.; Frieling, G.; Walther, F.:
Corrosion fatigue assessment of creep-resistant magnesium alloys DieMag422 and AE42 using electrochemical responses.
LightMAT 2017, Proceedings of the 2nd International Conference on Light Materials - Science and Technology (2017) 1-2.

183) Schmack, T.; Jansen, T.; Filipe, T.; Walther, F.:
Development of a new standard for dynamic mechanical properties characterization of CFRP.
Composites 2017, Proceedings of the 6th ECCOMAS Thematic Conference on the Mechanical Response of Composites, Ed.: Remmers, J.; Turon, A., (2017) 271-282.

182) Hülsbusch, D.; Barandun, G.A.; Walther, F.:
PRISCA: Polyurethane as a matrix material for composite components.
FAPU, European Polyurethane Journal 100 (2017) 36-38.

181) Hülsbusch, D.; Jamrozy, M.; Mrzljak, S.; Walther, F.:
Strain rate-related characterization of fatigue behavior of glass-fiber-reinforced polyurethane and epoxy.
ICCM21, Proceedings of the 21st International Conference on Composite Materials, Ed.: Chinese Society for Composite Materials (CSCM), (2017) 1-10.

180) Schmack, T.; Righi, R.; Hülsbusch, D.; Rausch, J.; Roquette, D.; Deinzer, G.; Kothmann, M.; Kassapoglou, C.; Walther, F.:
A newly-developed fixture and testing method for strain rate-dependent flexural properties determination of carbon/epoxy composites.
ICCM21, Proceedings of the 21st International Conference on Composite Materials, Ed.: Chinese Society for Composite Materials (CSCM), (2017) 1-12.

179) Biermann, D.; Walther, F.; Hannich, S.; Wittke, P.:
Front face flow drilling of lightweight cast materials.
Procedia Engineering 207 (2017) 956-961. https://doi.org/10.1016/j.proeng.2017.10.858

178) Goerlich, P.; Scholz, R.; Walther, F.:
Micro-CT defect analysis and hardness distribution of flat-face extruded EN AW6060 aluminium chips.
Materials Testing 59, 7-8 (2017) 613-617. https://doi.org/10.3139/120.111050 - Download

177) Hülsbusch, D.; Jamrozy, M.; Mrzljak, S.; Walther, F.:
Mechanism-oriented characterization of the fatigue behavior of glass fiber-reinforced polyurethane based on hysteresis and temperature measurements.
Key Engineering Materials 742, ISSN 1013-9826 (2017) 629-635. https://doi.org/10.4028/www.scientific.net/KEM.742.629

176) Hoepfner, M.; Becker, T.; Hülsbusch, D.; Walther, F.:
Characterization of hybrid joining techniques for FRP/steel-structures under combined mechanical and thermal loading.
Key Engineering Materials 742, ISSN 1013-9826 (2017) 358-365. https://doi.org/10.4028/www.scientific.net/KEM.742.358

175) Tekkaya, A.E.; Ben Khalifa, N.; Hering, O.; Meya, R.; Myslicki, S.; Walther, F.:
Forming-induced damage and its effects on product properties.
CIRP Annals - Manufacturing Technology 66 (2017) 281-284. https://doi.org/10.1016/j.cirp.2017.04.113

174) Myslicki, S.; Winkler, C.; Gelinski, N.; Schwarz, U.; Walther, F.:
Fatigue assessment of adhesive wood joints through physical measuring technologies.
Fatigue 2017, 7th International Conference on Durability and Fatigue, Engineering Integrity Society, Cambridge, UK, Ed.: P. Bailey, F. Berto, E.R. Cawte, P. Roberts, M.T. Whittaker, J.R. Yates (Eds.), ISBN 978-0-9544368-3-4 (2017) 446-455.

173) Schmiedt, A.; Nowak, D.; Manka, M.; Wojarski, L.; Tillmann, W.; Walther, F.:
Corrosion fatigue assessment of brazed AISI 304/BNI-2 joints in synthetic exhaust gas condensate.
1. Fatigue 2017, 7th International Conference on Durability and Fatigue, Engineering Integrity Society, Cambridge, UK, Ed.: P. Bailey, F. Berto, E.R. Cawte, P. Roberts, M.T. Whittaker, J.R. Yates (Eds.), ISBN 978-0-9544368-3-4 (2017) 201-210.
2. EIS Engineering Integrity 43 (2017) 17-23.

172) Knorre, S.; Tenkamp, J.; Krupp, U.; Michels, W.; Walther, F.:
Influence of microstructural characteristics on the VHCF behavior of the aluminum cast alloy EN AC-AlSi7Mg0.3.
VHCF7, Proceedings of the 7th International Conference on Very High Cycle Fatigue, Dresden, ISBN 978-3-00-056960-9 (2017) 223-228.

171) Siddique, S.; Awd, M.; Walther, F.:
Influence of hybridization by selective laser melting on the very high cycle fatigue behavior of aluminium alloys.
VHCF7, Proceedings of the 7th International Conference on Very High Cycle Fatigue, Dresden, ISBN 978-3-00-056960-9 (2017) 229-234.

170) Schmiedt, A.; Manka, M.; Tillmann, W.; Walther, F.:
Characterisation of the corrosion fatigue behaviour of brazed AISI 304L/BNi-2 joints in synthetic exhaust gas condensate.
1. IIW 2017, 70th IIW Annual Assembly and International Conference, Doc XVIIA-0105-17 (2017) 1-14.
2. Welding in the World 62, 3 (2018) 617-627. https://doi.org/10.1007/s40194-018-0557-y

169) Klein, M.; Walther, F.:
Electrochemical- and microstructure-correlated characterisation of the corrosion fatigue behaviour of creep-resistant magnesium alloys DieMag422 and AE42.
LCF 8, Proceedings of the 8th International Conference on Low Cycle Fatigue, Ed.: T. Beck, E. Charkaluk, ISBN 978-3-9814516-5-8 (2017) 197-202.

168) Tenkamp, J.; Knorre, S.; Krupp, U.; Michels, W.; Walther, F.:
Effect of microstructure characteristics on the fatigue and crack propagation behavior of the aluminum cast alloy EN AC-AlSi7Mg0.3.
ICF14, Proceedings of the 14th International Conference on Fracture (2017) 1-2.

167) Wittke, P.; Hannich, S.; Biermann, D.; Walther, F.:
Microstructure-based characterization of the cyclic deformation behavior of friction drilled internal threads in aluminium and magnesium alloys AlSi10Mg, AZ31 and AZ91.
ICF14, Proceedings of the 14th International Conference on Fracture (2017) 1-2.

166) Tillmann, W.; Walther, F.; Luo, W.; Haack, M.; Nellesen, J.; Knyazeva, M.:
In situ acoustic monitoring of thermal spray process using high-frequency impulse measurements.
ITSC 2017, Proceedings of the International Thermal Spray Conference 2017 - DVS-Berichte Volume 336, DVS Media GmbH, ISBN 978-3-96144-000-9 (2017) 72-78.

165) Tenkamp, J.; Siddique, S.; Walther, F.:
Detaillierte Untersuchungen zur Bewertung des Ermüdungsverhaltens von Bauteilen bei hohen Lastspielzahlen.
Qualität und Zuverlässigkeit 5 (2017) 88-90.

164) Schmiedt, A.; Manka, M.; Tillmann, W.; Walther, F.:
Influence of pre-corrosion caused by synthetic exhaust gas condensates of the automotive industry on tensile and fatigue properties of brazed AISI 304/BNi-2 joints.
SoSDiD, 5th Symposium on Structural Durability in Darmstadt, Hrsg.: M. Vormwald, H. Th. Beier, K. Breidenbach, ISBN 978-3-939195-55-9 (2017) 1-13.

163) Siddique, S.; Tenkamp, J.; Walther, F.:
Einfluss prozessinduzierter Defekte auf das Ermüdungsverhalten additiv-gefertigter AlSi12-Strukturen bei hohen und sehr hohen Lastspielzahlen.
Additive Fertigung von Bauteilen und Strukturen, Springer Publications, ISBN 978-3-658-17779-9 (2017) 215-226. https://doi.org/10.1007/978-3-658-17780-5_14

162) Siddique, S.; Awd, M.; Tenkamp, J.; Walther, F.:
Development of a stochastic approach for fatigue life prediction of AlSi12 alloy processed by selective laser melting.
Engineering Failure Analysis 79 (2017) 34-50. https://doi.org/10.1016/j.engfailanal.2017.03.015

161) Baak, N.; Garlich, M.; Schmiedt, A.; Bambach, M.; Walther, F.:
Characterization of residual stresses in austenitic disc springs induced by martensite formation during incremental forming using micromagnetic methods.
Materials Testing 59, 4 (2017) 309-314. https://doi.org/10.3139/120.111012 - Download

160) Klein, M.; Frieling, G.; Walther, F.:
Corrosion fatigue cracking assessment of creep-resistant magnesium alloys using corrosion potential responses.
Corrosion 2017, Conference & Expo, Research in progress symposium (2017) 125-129.

159) Schmiedt, A.; Lücker, L.; Kolesnikov, A.G.; Plokhikh, A.; Walther, F.:
Production- and microstructure-based fatigue assessment of metallic AISI 304/430 multilayer materials produced by hot pack rolling.
Materials Testing 59, 2 (2017) 123-129. https://doi.org/ https://doi.org/10.3139/120.110976 - Download

158) Hülsbusch, D.; Jamrozy, M.; Frieling, G.; Mueller, Y.; Barandun, G.A.; Niedermeier, M.; Walther, F.:
Comparative characterization of quasi-static and cyclic deformation behavior of glass fiber-reinforced polyurethane (GFR-PU) and epoxy (GFR-EP).
Materials Testing 59, 2 (2017) 109-117. https://doi.org/10.3139/120.110972 - Download

157) Siddique, S.; Imran, M.; Walther, F.:
Very high cycle fatigue and fatigue crack propagation behavior of selective laser melted AlSi12 alloy.
International Journal of Fatigue 94, 2 (2017) 246-254. https://doi.org/10.1016/j.ijfatigue.2016.06.003

156) Klein, M.; Lu, X.; Blawert, C.; Kainer, K.U.; Zheludkevich, M.L.; Walther, F.:
Influence of plasma electrolytic oxidation coatings on fatigue performance of AZ31 Mg alloy.
Materials and Corrosion 68 (2017) 50-57. https://doi.org/10.1002/maco.201609088

155) Klein, M.; Buhr, P.; Walther, F.:
Microstructure-based assessment of the corrosion fatigue behavior of the creep-resistant DieMag422 and AE42 magnesium alloys.
Solid State Phenomena 258 (2017) 530-533. https://doi.org/10.4028/www.scientific.net/SSP.258.530

 

2015 - 2016

154) Scholz, R.; Delp, A.; Kaplan, A.; Walther, F.:
Vergleichende Bewertung der temperaturabhängigen mechanischen Eigenschaften von Vulkanfiber und technischen Kunststoffen.
Werkstoffprüfung 2016 - Fortschritte in der Werkstoffprüfung für Forschung und Praxis, Hrsg.: H.-J. Christ, Stahleisen, ISBN 978-3-514-00830-4 (2016) 245-250.

153) Schmiedt, A.; Heinen, M.; Walther, F.; Manka, M.; Tillmann, W.:
Korrosionsermüdungsverhalten gelöteter AISI 304/BNi-2 Verbindungen in synthetischem Abgaskondensat.
Werkstoffprüfung 2016 - Fortschritte in der Werkstoffprüfung für Forschung und Praxis, Hrsg.: H.-J. Christ, Stahleisen, ISBN 978-3-514-00830-4 (2016) 119-124.

152) Knorre, S.; Krupp, U.; Michels, W.; Tenkamp, J.; Walther, F.:
Einfluss der Porositätscharakteristik auf das Ermüdungs- und Rissfortschrittsverhalten der Aluminiumgusslegierung EN AC-AlSi7Mg0,3.
Werkstoffprüfung 2016 - Fortschritte in der Werkstoffprüfung für Forschung und Praxis, Hrsg.: H.-J. Christ, Stahleisen, ISBN 978-3-514-00830-4 (2016) 77-82.

151) Imran, M.; Siddique, S.; Guchinsky, R.; Petinov, S.; Walther, F.:
Comparison of fatigue life assessment by analytical, experimental and damage accumulation modelling approach for steel SAE 1045.
Fatigue & Fracture of Engineering Materials & Structures 39 (2016) 1138-1149. https://doi.org/10.1111/ffe.12426

150) Vallée, T.; Bletz-Mühldorfer, O.; Myslicki, S.; Grunwald, C.; Walther, F.; Bathon, L.:
Glued-in rods in hardwood and hardwood laminated veneer lumber: report on a large experimental campaign.
WCTE 2016, Proceedings of World Conference on Timber Engineering, ISBN 978-3-903024-35-9 (2016) 643-651.

149) Siddique, S.; Imran, M.; Wycisk, E.; Emmelmann, C.; Walther, F.:
Fatigue assessment of laser additive manufactured AlSi12 eutectic alloy in the very high cycle fatigue (VHCF) range up to 1E9 cycles.
Materials Today: Proceedings 3 (2016) 2853-2860. https://doi.org/10.1016/j.matpr.2016.07.004

148) Siddique, S.; Tenkamp, J.; Walther, F.:
Einfluss prozessinduzierter Defekte auf das Ermüdungsverhalten additiv-gefertigter AlSi12-Strukturen bei hohen und sehr hohen Lastspielzahlen.
1. Tagung des DVM-AK Additiv gefertigte Bauteile und Strukturen, Hrsg.: H.-A. Richard, DVM e.V., ISSN 2509-8772 (2016) 83-90.

147) Klein, M.; Hülsbusch, D.; Siddique, S.; Walther, F.:
Assessment of influence of corrosive environment on fatigue performance of intrinsic CFRP/steel hybrids.
Materials Today: Proceedings 3 (2016) 2861-2868. https://doi.org/10.1016/j.matpr.2016.07.005

146) Scholz, R.; Mittendorf, R.-M.; Engels, J. K.; Hartmaier, A.; Künne, B.; Walther, F.:
Direction-dependent mechanical characterization of cellulose-based composite vulcanized fiber.
Materials Testing 58, 10 (2016) 813-817. https://doi.org/10.3139/120.110929 - Download

145) Tenkamp, J.; Weibring, M.; Haack, M.; Tenberge, P.; Walther, F.:
Application of micro-magnetic testing systems for non-destructive analysis of wear progress in case-hardened 16MnCr5 gear wheels.
Materials Testing 58, 9 (2016) 709-716. https://doi.org/10.3139/120.110924 - Download

144) Kaufmann, N.; Imran, M.; Wischeropp, T.M.; Emmelmann, C.; Siddique, S.; Walther, F.:
Influence of process parameters on the quality of aluminium alloy EN AW 7075 using selective laser melting (SLM).
Physics Procedia 83 (2016) 918-926. https://doi.org/10.1016/j.phpro.2016.08.096

143) Siddique, S.; Walther, F.:
Fatigue and fracture reliability of additively manufactured Al-4047 and Ti-6Al-4V alloys for automotive and aerospace applications.
Innovative Design and Development Practices in Aerospace and Automotive Engineering, Eds.: R. P. Bajpai, U. Chandrasekhar, ISBN 978-981-10-1770-4 (2016) 19-25. https://doi.org/10.1007/978-981-10-1771-1_6

142) Klein, M.; Walther, F.:
Electrochemical-controlled characterization of the corrosion fatigue behavior of creep-resistant magnesium alloys DieMag422 and AE42.
Procedia Engineering 160 (2016) 158-166. https://doi.org/ 10.1016/j.proeng.2016.08.876

141) Myslicki, S.; Vallée, T.; Walther, F.:
Short-time procedure for fatigue assessment of beech wood and adhesively bonded beech wood joints.
Materials and Structures 49, (2016) 2161-2170. https://doi.org/10.1617/s11527-015-0640-4

140) Wittke, P.; Walther, F.:
Cyclic deformation behavior of friction drilled internal threads in AlSi10Mg and AZ31 profiles.
Procedia Structural Integrity 2 (2016) 3264-3271. https://doi.org/10.1016/j.prostr.2016.06.407

139) Klein, M.; Starke, P.; Nowak, D.; Boller, C.; Walther, F.:
Separation of surface, subsurface and volume fatigue damage effects in AISI 348 steel for power plant applications.
Materials Testing 58, 7-8 (2016) 601-607. https://doi.org/10.3139/120.110896 - Download

138) Tillmann, W.; Wojarski, L.; Manka, M.; Walther, F.; Wittke, P.; Schmiedt, A.:
Examination of the influencing factors on the microstructure of AISI 304/ BNi-2 joints.
Loet 2016, Proceedings of the 11th International Conference on Brazing, High Temperature Brazing and Diffusion Bonding, Aachen, DVS-Berichte Band 325, ISBN 978-3-945023-64-8 (2016) 233-238.

137) Hülsbusch, D.; Mueller, Y.; Barandun, G. A.; Niedermeier, M.; Walther, F.:
Mechanical properties of GFR-polyurethane and -epoxy for impact-resistant applications under service-relevant temperatures.
ECCM17, Proceedings of the 17th European Conference on Composite Materials, Publisher: European Society for Composite Materials (ESCM) ISBN 978-3-00-053387-7 (2016) 1-8.Download

136) Schmack, T.; Hülsbusch, D.; Righi, R.; Rausch, J.; Roquette, D.; Deinzer, G.; Walther, F.:
Influence of load application and fixture on characteristic values at short-time dynamic compression testing of carbon fiber-epoxy composites.
ECCM17, Proceedings of the 17th European Conference on Composite Materials, European Society for Composite Materials (ESCM), ISBN 978-3-00-053387-7 (2016) 1-8.

135) Yener, T.; Güler, S.; Siddique, S.; Walther F.; Zeytin, S.:
Determination of the Young Modulus of Ti-TiAl3 metallic intermetallic laminate composites by nano-indentation.
Acta Physica Polonica A 129, 4 (2016) 604-606. https://doi.org/10.12693/APhysPolA.129.604

134) Caspari, T.; Hülsbusch, D.; Haack, M.; Solbach, A.; Emmelmann, C.; Walther, F.:
Technological and economical aspects of novel hybrid joining strategies based on integrated fibre penetrating reinforcing elements.
Euro Hybrid 2016, ISBN 978-3-88355-414-3 (2016) 81-85.

133) Guchinsky, R. V.; Petinov, S.V.; Siddique, S.; Imran, M.; Walther, F.:
Fatigue life prediction based on finite-element modeling damage accumulation including material inhomogeneity.
St. Petersburg State Polytechnical University Journal, 231 (2016) 134-143.

132) Lyubimova, O.; Gridasova, E.; Gridasov, A.; Frieling, G.; Klein, M.; Walther, F.:
Characterisation of the mechanical and corrosive properties of newly developed glass-steel composites.
Materials and Technology 50, 1 (2016) 95-100. https://doi.org/10.17222/mit.2014.305

131) Imran, M.; Walther, F.:
Metal forming (cold): Dislocation mechanisms and microstructural changes.
Materials Science and Materials Engineering, Elsevier, ISBN 9780128035818 (2016) 1-11. https://doi.org/10.1016/B978-0-12-803581-8.02881-2

130) Wittke, P.; Klein, M.; Dieringa, H.; Walther, F.:
Corrosion fatigue assessment of creep-resistant magnesium alloy Mg-4Al-2Ba-2Ca in aqueous sodium chloride solution.
International Journal of Fatigue 83, 1 (2016) 59-65. https://doi.org/10.1016/j.ijfatigue.2015.04.001

129) Wycisk, E.; Siddique, S.; Herzog, D.; Walther, F.; Emmelmann, C.:
Fatigue performance of laser additive manufactured Ti-6Al-4V in very high cycle fatigue regime up to 109 cycles.
Frontiers in Materials 2: 72 (2015) 1-8. https://doi.org/10.3389/fmats.2015.00072

128) Siddique, S.; Wycisk, E.; Tenkamp, J.; Hoops, K.; Behrens, G.; Emmelmann, C.; Walther, F.:
Mechanical performance of hybrid aluminum structures manufactured by combination of laser additive manufacturing and conventional machining processes.
Werkstoffprüfung 2015 - Fortschritte in der Werkstoffprüfung für Forschung und Praxis, Hrsg.: M. Borsutzki, G. Moninger, Stahleisen, ISBN 978-3-514-00816-8 (2015) 157-162.

127) Haack, M.; Hülsbusch, D.; Solbach, A.; Emmelmann, C.; Walther, F.:
Quasistatisch- und zyklisch-induzierte Schädigungsentwicklung form- und stoffschlüssiger TiAl6V4-CFK-Verbindungen in Abhängigkeit der Verstärkungselemente.
Werkstoffprüfung 2015 - Fortschritte in der Werkstoffprüfung für Forschung und Praxis, Hrsg.: M. Borsutzki, G. Moninger, Stahleisen, ISBN 978-3-514-00816-8 (2015) 151-156.

126) Myslicki, S.; Ortlieb, M.; Frieling, G.; Walther, F.:
High-precision deformation and damage development assessment of composite materials by high-speed camera, high-frequency impulse and digital image correlation techniques.
Materials Testing 57, 11-12 (2015) 933-941. https://doi.org/10.3139/120.110813 - Download

125) Klein, M.; Wittke, P.; Walther, F.:
Electrochemical-based assessment of the corrosion fatigue behavior of creep-resistant magnesium alloys DieMag422 and AE42.
Mg2015, Proceedings of the 10th International Conference on Magnesium Alloys and Their Applications (2015) 1-13.

124) Fiedler Bremer, C.; Scholz, R.; Myslicki, S.; Starke, P.; Boller, C.; Walther, F.; Krause, M.:
NDT-based characterization of timber and vulcanized fiber for civil infrastructure.
NDT-CE, International Symposium Non-Destructive Testing in Civil Engineering, Berlin (2015) 1-11.

123) Yener, T.; Siddique, S.; Walther, F.; Zeytin, S.:
Effect of electric current on the production of NiTi intermetallics via electric-current-activated sintering.
Materials and Technology 49, 5 (2015) 721-724. https://doi.org/10.17222/mit.2014.161

122) Starke, P.; Walther, F.:
Zeit- und kosteneffiziente Ermittlung des Ermüdungsverhaltens sicherheitsrelevanter Werkstoffe und Bauteile.
Pforzheimer Werkstofftag 2015, Hrsg.: N. Jost, R. Klink, Band 153, Publikationsserie Focus Werkstoffe, ISSN 0946-3755 (2015) 5-17.

121) Siddique, S.; Walther, F.:
Selective laser melting: Mechanical performance of light-weight alloys.
Additive Manufacturing (AM): Emerging Technologies, Applications and Economic Implications, Nova Science Publishers, ISBN 978-1-63463-850-0 (2015) 75-109.

120) Hülsbusch, D.; Haack, M.; Solbach, A.; Emmelmann, C.; Walther, F.:
Influence of pin size on tensile and fatigue behavior of Ti-CFRP hybrid structures produced by laser additive manufacturing.
ICCM20, Proceedings of the 20th International Conference on Composite Materials, (2015) 1-12.

119) Siddique, S.; Imran, M.; Rauer, M.; Kaloudis, M.; Wycisk, E.; Emmelmann, C.; Walther, F.:
Computed tomography for characterization of fatigue performance of selective laser melted parts.
Materials & Design 83 (2015) 661-669. https://doi.org/10.1016/j.matdes.2015.06.063

118) Siddique, S.; Imran, M.; Wycisk, E.; Emmelmann, C.; Walther, F.:
Influence of process-induced microstructure and imperfections on mechanical properties of AlSi12 processed by selective laser melting.
Journal of Materials Processing Technology 221 (2015) 205-213. https://doi.org/10.1016/j.jmatprotec.2015.02.023

117) Wittke, P.; Liu, Y.; Biermann, D.; Walther, F.:
Influence of the production process on the deformation and fatigue performance of friction drilled internal threads in the aluminum alloy 6060.
Materials Testing 57, 4 (2015) 281-288. https://doi.org/10.3139/120.110712 - Download

116) Solbach, A.; Hülsbusch, D.; Haack, M.; Emmelmann, C.; Walther, F.:
Investigation of fiber reinforced plastic penetration produced by laser additive manufacturing with pin size variation.
AST2015, Proceedings of 5th Internatiol Workshop on Aircraft System Technologies, ISBN 978-3-84403319-9 (2015) 315-323.

115) Siddique, S.; Wycisk, E.; Frieling, G.; Emmelmann, C.; Walther, F.:
Microstructural and mechanical properties of selective laser melted Al 4047.
Applied Mechanics and Materials Vols. 752-753 (2015) 485-490. https://doi.org/10.4028/www.scientific.net/AMM.752-753.485

114) Holweger, W.; Wolf, M.; Merk, D.; Blass, T.; Goss, M.; Loos, J.; Barteldes, S.; Jakovics, A.:
White etching crack root cause investigations.
Tribology Transactions 58, 1 (2015) 59-69. https://doi.org/10.1080/10402004.2014.942938

113) Hülsbusch, D.; Walther, F.:
Damage detection and fatigue strength estimation of carbon fibre reinforced polymers (CFRP) using combined electrical and high-frequency impulse measurements.
The e-Journal of Nondestructive Testing 20, 1 ISSN 1435-4934 (2015) 1-9.

112) Starke, P.; Walther, F.:
Modellbasierte Korrelation zwischen dem elektrischen Widerstand und der Versetzungsstruktur des ermüdungsbeanspruchten ICE-Radstahls R7.
Materials Testing 57, 1 (2015) 9-16. https://doi.org/10.3139/120.110681 - Download

 

2013 - 2014

111) Klein, M.; Wittke, P.; Walther, F.:
Mikrostrukturbasierte Beschreibung des Korrosionsermüdungsverhaltens der kriechbeständigen Magnesiumlegierung Mg-4Al-2Ba-2Ca.
Werkstoffprüfung 2014 - Fortschritte in der Werkstoffprüfung für Forschung und Praxis, Hrsg.: W. Grellmann, H. Frenz, Stahleisen, ISBN 978-3-9814516-8-9 (2014) 309-314.

110) Hülsbusch, D.; Özkan, F.; Walther, F.:
Schadensdetektion und -bewertung an kohlenstofffaserverstärkten Kunststoffen durch simultane Hochfrequenzimpuls-und Widerstandsmessungen in Kurzzeit-Ermüdungsexperimenten.
Werkstoffprüfung 2014 - Fortschritte in der Werkstoffprüfung für Forschung und Praxis, Hrsg.: W. Grellmann, H. Frenz, Stahleisen, ISBN 978-3-9814516-8-9 (2014) 143-148.

109) Frantz, M.; Lauter, C.; Tröster, T.; Hausmann, J.; Bartsch, M.; Hülsbusch, D. und Walther, F.:
Efficient manufacturing of hybrid structures consisting of steel and CFRP with using residual heat / Effiziente Herstellung von Hybridbauteilen aus Stahl und CFK mithilfe von Restwärmeausnutzung.
New Developments in Sheet Metal Forming (Neuere Entwicklungen in der Blechumformung), Hrsg.: M. Liewald, ISBN 978-3-88355-400-6 (2014) 233-243 / 243-254.

108) Barteldes, S.; Walther, F.; Holweger, W.:
Wälzlagerdiagnose und Detektion von White Etching Cracks mit Barkhausen-Rauschen und Hochfrequenz-Impuls-Messung.
Aachener Schriften zur Rohstoff- und Entsorgungstechnik 81, Hrsg.: K. Nienhaus, P. Burgwinkel, Verlag R. Zillekens, ISBN 978-3-941277-17-5 (2014) 435-444.

107) Klein, M.; Kuhlmann, F.; Wittke, P.; Dieringa, H.; Walther, F.:
Microstructure-based characterization of the corrosion behavior of the creep resistant Mg-Al-Ba-Ca alloy DieMag422.
Materials and Corrosion 65 (2014) 991-998. https://doi.org/10.1002/maco.201307327

106) Wycisk, E; Solbach, A; Siddique, S; Herzog, D; Walther, F; Emmelmann, C.:
Effects of defects in laser additive manufactured Ti-6Al-4V on fatigue properties
Physics Procedia 56 (2014) 371-378. https://doi.org/10.1016/j.phpro.2014.08.120

105) Walther, F.:
Microstructure-oriented fatigue assessment of construction materials and joints using short-time load increase procedure.
Materials Testing 56, 7-8 (2014) 519-527. https://doi.org/10.3139/120.110592 - Download

104) Wittke, P.; Klein, M.; Walther, F.:
Corrosion fatigue behaviour of creep-resistant magnesium alloy Mg-4Al-2Ba-2Ca.
Procedia Engineering 74 (2014) 78-83. https://doi.org/10.1016/j.proeng.2014.06.228

103) Laatz, A.; Frieling, G. ; Walther, F.:
Kunststoffe eine neue Herausforderung für die Messtechnik.
ATZ extra 19, 1 (2014) 40-45. https://doi.org/10.1365/s35778-014-1247-z

102) Shi, J.; Pries, H.; Dilger, K.; Klein, M.; Walther, F.:
Surface chemical inhomogeneity of high-pressure die cast Al-Si alloys and its effects on corrosion behaviors and adhesive bonding capabilities.
71st WFC, World Foundry Congress (2014) 1-6.

101) Barteldes, S.; Walther, F.; Holweger, W.:
Residual stress evolution and acoustic emission during lubrication- assisted white etching crack (WEC) formation.
STLE 2014, Society of Tribologists and Lubrication Engineers Annual Meeting & Exhibition (2014) 1-4.

100) Frieling, G.; Walther, F.:
Fatigue assessment of fiber bragg grating sensors.
SoSDiD, 4th Symposium on Structural Durability in Darmstadt, Ed.: J. Baumgartner, T. Melz, ISBN 978-3-8396-0734-3 (2014) 230-241.

99) Klein, M.; Hülsbusch, D.; Walther, F.; Bartsch, M.; Hausmann, J.; Frantz, M.; Lauter, C.; Tröster, T.:
Characterization of the corrosion influence on the fatigue behavior of intrinsic CFRP-steel-hybrids.
Euro Hybrid 2014, ISBN 978-3-88355-402-0 (2014) 101-108.

98) Wittke, P.; Klein, M.; Walther, F.:
Chemisch-mechanische Charakterisierung der kriechbeständigen bariumhaltigen Mg-Al-Ca-Legierung DieMag422.
Materials Testing 56, 1 (2014) 16-23. https://doi.org/10.3139/120.110519 - Download

97) Barteldes, S.; Frieling, G.; Walther, F.:
Zerstörungsfreie Bewertung des Ermüdungs- und Schädigungszustands von Wälzlagern aus 100Cr6 in Windenergieanlagen.
Werkstoffprüfung 2013 - Fortschritte in der Werkstoffprüfung für Forschung und Praxis, Hrsg.: H.-J. Christ, Stahleisen, ISBN 978-3-514-00806-9 (2013) 313-318.

96) Penning, B.; Walther, F.:
Gefügestrukturbasierte Bewertung des Ermüdungsverhaltens von aus Zellulosefasern hergestellter technischer Vulkanfiber.
Werkstoffprüfung 2013 - Fortschritte in der Werkstoffprüfung für Forschung und Praxis, Hrsg.: H.-J. Christ, Stahleisen, ISBN 978-3-514-00806-9 (2013) 169-174.

95) Wittke, P.; Walther, F.; Liu, Y.; Biermann, D.:
Charakterisierung des quasistatischen und zyklischen Verformungsverhaltens von fließgebohrten Aluminium-Innengewinden aus EN AW-6060.
Werkstoffprüfung 2013 - Fortschritte in der Werkstoffprüfung für Forschung und Praxis, Hrsg.: H.-J. Christ, Stahleisen, ISBN 978-3-514-00806-9 (2013) 121-126.

94) Walther, F.:
Mikrostruktur und Ermüdungsverhalten von Leichtbauwerkstoffen und -verbindungen.
Werkstoffprüfung 2013 - Fortschritte in der Werkstoffprüfung für Forschung und Praxis, Hrsg.: H.-J. Christ, Stahleisen, ISBN 978-3-514-00806-9 (2013) 1-11.

93) Barteldes, S.; Walther, F.:
Zerstörungsfreie Analyse des Betriebs- und Schädigungszustands von Wälzlagern in Windenergieanlagen.
20. Sächsische Fachtagung Umformtechnik, Hrsg.: A. Brosius, Professur für Formgebende Fertigungsverfahren, ISBN 978-3-86780-366-3 (2013) 169-176.

92) Wycisk, E.; Emmelmann, C.; Siddique, S.; Walther, F.:
High cycle fatigue (HCF) performance of Ti-6Al-4V alloy processed by selective laser melting.
Advanced Materials Research Vols. 816-817 (2013) 134-139. https://doi.org/10.4028/www.scientific.net/AMR.816-817.134

91) Klein, M.; Wittke, P.; Dieringa, H.; Walther, F.:
Influence of corrosion on fatigue properties of new creep-resistant magnesium alloy DieMag422.
LCF 7, 7th International Conference on Low Cycle Fatigue, Proceedings, ISBN 978-3-9814516-2-7 (2013) 319-324.

90) Penning, B.; Walther, F.; Mittendorf, R.; Künne, B.:
Eigenschafts- und fügetechnische Qualifizierung des "neuen" ressourcengerechten Faserleichtbauwerkstoffs Vulkanfiber.
Werkstoffe in der Fertigung, 4 (2013) 10-11.

89) Dieringa, H.; Huang, Y.; Wittke, P.; Klein, M.; Walther, F.; Dikovits, M.; Poletti, C.:
Compression-creep response of magnesium alloy DieMag422 containing barium compared with the commercial creep-resistant alloys AE42 and MRI230D.
Materials Science and Engineering A 585 (2013) 430-438. https://doi.org/10.1016/j.msea.2013.07.041

88) Frieling, G.; Walther, F.:
Tensile and fatigue properties of Fiber-Bragg-Grating (FBG) sensors.
Sensors & Transducers Journal 154, 7 (2013) 143-148.

87) Manka, M.; Wojarski, L.; Tillmann, W.; Frieling, G.; Myslicki, S.; Walther, F.:
Fatigue behavior of brazed AISI 304 joints using Au-fillers.
Loet 2013, 10th International Conference on Brazing, High Temperature Brazing and Diffusion Bonding, Aachen, DVS-Berichte Band 293, ISBN 978-3-87155-611-1 (2013) 232-236.

86) Penning, B.; Walther, F.; Dumke, D.; Künne, B.:
Einfluss der Verformungsgeschwindigkeit und des Feuchtegehaltes auf das quasistatische Verformungsverhalten technischer Vulkanfiber.
Materials Testing 55, 4 (2013) 276-284. https://doi.org/10.3139/120.110435 - Download

 

2011 - 2012

85) Frieling, G.; Pantke, K.; Walther, F.; Haase, K.-H.:
Zug- und Ermüdungseigenschaften von Faser-Bragg-Gitter- (FBG-) Sensoren.
Lightweight Design 6 (2012) 31-38. https://doi.org/10.1365/s35725-013-0134-7

84) Barteldes, S.; Frieling, G.; Walther, F.:
Ermüdungseigenschaften von optischen Dehnungssensoren (Faser-Bragg-Gitter-Sensoren).
Werkstoffprüfung 2012 - Fortschritte in der Werkstoffprüfung für Forschung und Praxis, Hrsg.: M. Borsutzki, G. Moninger, Stahleisen, ISBN 978-3-514-00794-9 (2012) 217-224.

83) Wittke, P.; Pipetz, A.; Dieringa, H.; Walther, F.:
Einfluss von Korrosion auf das Ermüdungsverhalten der Magnesiumlegierung DieMag422.
Werkstoffprüfung 2012 - Fortschritte in der Werkstoffprüfung für Forschung und Praxis, Hrsg.: M. Borsutzki, G. Moninger, Stahleisen, ISBN 978-3-514-00794-9 (2012) 179-186.

82) Holweger, W.; Wolf, M.; Walther, F.; Trojahn, W.; Mütze, A.; Kunzmann, J.; Schreiber, J.; Mayer, J.; Reichelt, M.:
Studies of the contribution of alternating electromagnetic fields toward material fatigue in 100Cr6.
Industrial Lubrication and Tribology 64, 5 (2012) 247-252. https://doi.org/10.1108/00368791211249629

81) Manka, M.; Wojarski, L.; Tillmann, W.; Penning, B.; Pantke, K.; Walther, F.:
A novel technique for the determination of long-term fatigue behavior of brazed joints.
IBSC 2012, 5th International Brazing and Soldering Conference (2012) 156-161.

80) Holweger, W.; Walther, F.; Loos, J.; Wolf, M.; Schreiber, J.; Dreher, W.; Kern, N.:
Non-destructive subsurface damage monitoring in bearings failure mode using fractal dimension analysis.
Industrial Lubrication and Tribology 64, 3 (2012), 132-137. https://doi.org/10.1108/00368791211218650

79) Zielke, R.; Tillmann, W.; Rademacher, H.-G.; Sievers, N.; Siebrecht, T.; Walther, F.:
Prüfung und Überwachung von Komponenten intralogistischer Anlagen.
Materials Testing 54, 1 (2012) 6-12. https://doi.org/10.3139/120.110288

 

2009 - 2010

78) Starke, P.; Walther, F.; Eifler, D.:
“PHYBAL“: a short-time procedure for a reliable fatigue-life calculation.
Advanced Engineering Materials 12, 4 (2010) 276-282. https://doi.org/10.1002/adem.200900344

77) Smaga, M.; Walther, F.; Eifler, D.:
Monotonic and cyclic deformation behaviour of the SiC particle-reinforced aluminium matrix composite AMC225xe.
Advanced Engineering Materials 12, 4 (2010) 262-268. https://doi.org/10.1002/adem.200900345

76) Starke, P.; Walther, F.; Eifler, D.:
New fatigue life calculation method for quenched and tempered steel SAE 4140.
Materials Science and Engineering A 523 (2009) 246-252. https://doi.org/10.1016/j.msea.2009.05.067

75) Peters, C.; Walther, F.; Eifler, D.:
Fatigue behaviour of railway wheel steels under mechanical-thermal service conditions.
ICF 12, 12th International Conference on Fracture, Ottawa, Canada, (2009) 1-10.

74) Smaga, M.; Walther, F.; Eifler, D.:
Fatigue life calculation of metastable austenitic steels.
ICF 12, 12th International Conference on Fracture, Ottawa, Canada, (2009) 1-10.

73) Starke, P.; Walther, F.; Eifler, D.:
PHYBAL - Short-time calculation of Woehler curves of wheel steels.
ZEV rail 133, 6-7 (2009) 251-255.

72) Starke, P.; Walther, F.; Eifler, D.:
Fatigue life estimation of metallic materials under constant amplitude and standardised service loading.
2nd International Conference on Material and Component Performance under Variable Amplitude Loading, Darmstadt, Ed.: C.M. Sonsino, P.C. McKeighan, Vol. 1&2 (2009) 903-912.

 

2007 - 2008

71) Koster, M.; Wagner, G.; Walther, F.; Eifler, D.:
Ultraschallermüdung hochbeanspruchter Radstähle.
Werkstoffprüfung 2008 - Herausforderungen neuer Werkstoffe an die Forschung und Werkstoffprüfung, Hrsg.: H. Frenz, W. Grellmann, DVM-Bericht 642, ISBN 978-3-00-026399-6 (2008) 263-268.

70) Smaga, M.; Walther, F.; Eifler, D.:
Einfluss des Oberflächen- und Eigenspannungszustandes auf das Ermüdungsverhalten von Aluminium-Matrix-Verbundwerkstoffen.
Werkstoffprüfung 2008 - Herausforderungen neuer Werkstoffe an die Forschung und Werkstoffprüfung, Hrsg.: H. Frenz, W. Grellmann, DVM-Bericht 642, ISBN 978-3-00-026399-6 (2008) 135-140.

69) Peters, C.; Walther, F.; Eifler, D.:
Einfluss betriebsrelevanter Temperaturen auf das Ermüdungsverhalten aktueller Eisenbahnradstähle.
Werkstoffprüfung 2008 - Herausforderungen neuer Werkstoffe an die Forschung und Werkstoffprüfung, Hrsg.: H. Frenz, W. Grellmann, DVM-Bericht 642, ISBN 978-3-00-026399-6 (2008) 121-128.

68) Starke, P.; Walther, F.; Eifler, D.:
Physikalisch basierte Methode zur Lebensdauerberechnung metallischer Werkstoffe „PHYBAL“.
Werkstoffprüfung 2008 - Herausforderungen neuer Werkstoffe an die Forschung und Werkstoffprüfung, Hrsg.: H. Frenz, W. Grellmann, DVM-Bericht 642, ISBN 978-3-00-026399-6 (2008) 105-112.

67) Gutensohn, M.; Wagner, G.; Walther, F.; Eifler, D.:
The fatigue behavior of friction stir welded aluminium joints.
Welding in the World, International Institute of Welding, 52, 9/10 (2008) IIW-1878-07 1-10.

66) Starke, P.; Walther, F.; Eifler, D.:
Short-time calculation of Woehler curves using “PHYBAL”.
IRS 2008, 2nd International Railway Symposium and Trade Exhibition, Istanbul, Turkey (2008) 1201-1210.

65) Gutensohn, M.; Wagner, G.; Walther, F.; Eifler, D.:
Cyclic deformation behaviour of friction stir welded aluminium joints.
Aluminium Alloys - Their Physical and Mechanical Properties, Proceedings 11th International Conference on Aluminium Alloys, Aachen, Hrsg.: J. Hirsch, B. Skrotzki, G. Gottstein, Wiley, ISBN 978-3-527-32367-8 (2008) 1998-2004.

64) Smaga, M.; Walther, F.; Eifler, D.:
Cyclic deformation behaviour and fatigue life calculation of metastable austenitic steels.
LCF 6, 6th International Conference on Low Cycle Fatigue, Berlin (2008) 423-428.

63) Walther, F.; Eifler, D.:
Characterisation of the fatigue behaviour of metals on the basis of mechanical hysteresis, temperature and resistance data.
LCF 6, 6th International Conference on Low Cycle Fatigue, Berlin (2008) 3-14.

62) Ebel-Wolf, B.; Walther, F.; Eifler, D.:
Influence of elevated temperatures on the cyclic deformation behaviour of the magnesium die-cast alloys AZ91D and MRI 230D.
Materials Science and Engineering A 486 (2008) 634-640. https://doi.org/10.1016/j.msea.2007.10.003

61) Walther, F.; Eifler, D.:
Short-time procedure for the determination of Woehler and fatigue life curves using mechanical, thermal and electrical data.
Journal of Solid Mechanics and Materials Engineering 2, 4 (2008) 507-518.

60) Smaga, M.; Walther, F.; Eifler, D.:
Deformation-induced martensitic transformation in metastable austenitic steels.
Materials Science and Engineering A 483-484 (2008) 394-397. https://doi.org/10.1016/j.msea.2006.09.140

59) Starke, P.; Walther, F.; Eifler, D.:
Hysteresis, temperature and resistance measurements for the characterization of the fatigue behavior of metals.
ISCS 2007, 5th International Conference Structural Integrity of Welded Structures - Testing & Risk Assessment in the Development of Advanced Materials and Joints, Timisora, Rumänien, www.ndt.net, Issue 2008-04 (2008) 1-9.

58) Wagner, V.; Walther, F.; Eifler, D.:
Fatigue behavior of railway wheel steels in the very high cycle regime.
Plasticity, Failure and Fatigue in Structural Materials - from Macro to Nano: Proceedings of the Hael Mughrabi Honorary Symposium, K.J. Hsia, M. Göken, T. Pollock, P.D. Portella, N.R. Moody (Eds.), TMS, ISBN 978-0-87339-714-8 (2008) 195-200.

57) Rojek, N.; Smaga, M.; Walther, F.; Eifler, D.:
Microstructure-oriented characterisation of the cyclic deformation behaviour of Ti-6Al-4V.
Materialwissenschaft und Werkstofftechnik 39, 3 (2008) 241-247. https://doi.org/10.1002/mawe.200700217

56) Walther, F.; Eifler, D.:
PHYBAL - Kurzzeitverfahren zur Berechnung der Lebensdauer metallischer Werkstoffe auf der Basis physikalischer Messgrößen.
Materials Testing 50, 3 (2008) 142-149.

55) Starke, P.; Walther, F.; Eifler, D.:
Kurzzeitverfahren zur Berechnung der Wöhlerkurve von Radwerkstoffen.
Eisenbahningenieur 58, 1 (2008) 31-35.

54) Walther, F.; Eifler, D.:
Hysteresis, temperature and resistance measurements for the characterization of the cyclic deformation behavior of metals.
Materials Science Forum 567-568 (2007) 51-56.

53) Gutensohn, M.; Wagner, G.; Walther, F.; Eifler, D.:
Charakterisierung quasistatischer und zyklischer Eigenschaften rührreibgeschweißter Aluminiumverbunde.
Werkstoffprüfung 2007 - Konstruktion, Qualitätssicherung und Schadensanalyse, Hrsg.: M. Pohl, Verlag Stahleisen GmbH, ISBN 978-3-514-00753-6 (2007) 323-328.

52) Klein, M.; Walther, F.; Eifler, D.:
Einfluss der Prozesskettengestaltung auf das Ermüdungsverhalten von Dehnschrauben.
Werkstoffprüfung 2007 - Konstruktion, Qualitätssicherung und Schadensanalyse, Hrsg.: M. Pohl, Verlag Stahleisen GmbH, ISBN 978-3-514-00753-6 (2007) 243-248.

51) Ebel-Wolf, B.; Walther, F.; Eifler, D.:
Einfluss der Temperatur und der Gusshaut auf das Ermüdungsverhalten der Magnesium-Gusslegierungen MRI 153M und MRI 230D.
Werkstoffprüfung 2007 - Konstruktion, Qualitätssicherung und Schadensanalyse, Hrsg.: M. Pohl, Verlag Stahleisen GmbH, ISBN 978-3-514-00753-6 (2007) 415-420.

50) Wagner, V.; Walther, F.; Eifler, D.:
Ermüdungsverhalten hochbeanspruchter Eisenbahnradstähle im Very-High-Cycle-Fatigue- (VHCF-) Bereich.
Werkstoffprüfung 2007 - Konstruktion, Qualitätssicherung und Schadensanalyse, Hrsg.: M. Pohl, Verlag Stahleisen GmbH, ISBN 978-3-514-00753-6 (2007) 379-384.

49) Starke, P.; Walther, F.; Eifler, D.:
Fatigue assessment and fatigue life calculation of quenched and tempered SAE 4140 steel based on stress-strain hysteresis, temperature and electrical resistance measurements.
Fatigue and Fracture of Engineering Materials and Structures 30 (2007) 1044-1051. https://doi.org/10.1111/j.1460-2695.2007.01174.x

48) Walther, F.; Eifler, D.:
Short-time procedure for the determination of Woehler and fatigue life curves using mechanical, temperature and electrical resistance data.
ATEM’07, International Conference on Advanced Technology in Experimental Mechanics, ACROS Fukuoka, Fukuoka, Japan (2007) 1-6.

47) Walther, F.; Eifler, D.:
Cyclic deformation behavior of steels and light-metal alloys.
Materials Science and Engineering A 468-470 (2007) 259-266. https://doi.org/10.1016/j.msea.2006.06.146

46) Koster, M.; Wagner, G.; Walther, F.; Eifler, D.:
New measuring methods for the fatigue assessment of metals in the very high cycle regime.
VHCF-4, 4th International Conference on Very High Cycle Fatigue, Ann Arbor, Michigan, USA, Ed.: J.E. Allison, J.W. Jones, J.M. Larsen, R.O. Ritchie , TMS, ISBN 978-0-87339-704-9 (2007) 347-352.

45) Wagner, V.; Ebel-Wolf, B.; Walther, F.; Eifler, D.:
Very high cycle fatigue of railway wheel steels.
VHCF-4, 4th International Conference on Very High Cycle Fatigue, Ann Arbor, Michigan, USA, Ed.: J.E. Allison, J.W. Jones, J.M. Larsen, R.O. Ritchie, TMS, ISBN 978-0-87339-704-9 (2007) 137-142.

44) Walther, F.; Eifler, D.:
Fatigue life calculation of SAE 1050 and SAE 1065 steel under random loading.
International Journal of Fatigue 29, 9-11 (2007) 1885-1892. https://doi.org/10.1016/j.ijfatigue.2007.01.005

43) Walther, F.; Eifler, D.:
Fatigue life calculation of metallic materials.
Key Engineering Materials 345-346 (2007) 1337-1340.

42) Rojek, N.; Smaga, M.; Walther, F.; Eifler, D.:
Cyclic deformation behaviour and lifetime calculation of Al-3Mg-Mn.
Materialwissenschaft und Werkstofftechnik 38, 4 (2007) 249-254. https://doi.org/10.1002/mawe.200700132

41) Walther, F.; Eifler, D.:
Fatigue behaviour and lifetime calculation of metals under random loading.
Fatigue 2007, 6th International Conference on Durability and Fatigue, Engineering Integrity Society, Cambridge, UK, Ed.: M.R. Bache, P.A. Blackmore, E.R. Cawte, P. Roberts, J.R. Yates, ISBN 978-0-954-43681-0 (2007) 1-10.

40) Klein, M.; Walther, F.; Eifler, D.:
Einfluss der Prozesskettengestaltung auf das Ermüdungsverhalten von Dehnschrauben.
8. Tagung Gefüge und Bruch, Bochum (2007) C4, 1-5.

39) Walther, F.; Eifler, D.:
Lebensdauerberechnung metallischer Werkstoffe auf der Basis physikalischer Messgrößen.
8. Tagung Gefüge und Bruch, Bochum (2007) 35-43.

38) Ebel-Wolf, B.; Walther, F.; Eifler, D.:
Cyclic deformation behaviour and lifetime calculation of the magnesium die-cast alloys AZ91D, MRI 153M and MRI 230D.
International Journal of Materials Research 98, 2 (2007) 117-122.

37) Walther, F.; Eifler, D.:
Fatigue behaviour of railway wheel steels under constant and variable amplitude loading.
Materials Science Forum 537-538 (2007) 473-480.

 

2005 - 2006

36) Smaga, M.; Walther, F.; Eifler, D.:
Deformation-induced martensite formation of cyclically loaded metastable austenitic steel.
Selected topics in the mechanics of inhomogeneous media, Ed.: Cz. Wozniak, R. Switka, M.S. Kuczma, Chapter 3.4, University of Zielona Góra Press, ISBN 83-7481-065-3 (2006) 219-227.

35) Rojek, N.; Walther, F.; Eifler, D.:
Cyclic deformation behaviour of Ti-6Al-4V.
Selected topics in the mechanics of inhomogeneous media, Ed.: Cz. Wozniak, R. Switka, M.S. Kuczma, Chapter 3.3, University of Zielona Góra Press, ISBN 83-7481-065-3 (2006) 209-217.

34) Smaga, M.; Walther, F.; Eifler, D.:
Investigation and modelling of the plasticity-induced martensite formation in metastable austenites.
International Journal of Materials Research 97, 12 (2006) 1648-1655.

33) Walther, F.:
Fatigue behaviour and lifetime calculation of the wheel steel R7 (SAE 1050) for random loading.
IRS 2006, International Railway Symposium, Ankara und Istanbul, Turkey, Ed.: S. Karaman, M. Karasahin, Vol. 1 (2006) 400-410.

32) Smaga, M.; Walther, F.; Eifler, D.:
Zyklisches Verformungsverhalten metastabiler austenitischer Stähle.
Werkstoffprüfung - Fortschritte der Kennwertermittlung für Forschung und Praxis, Hrsg.: M. Borsutzki, S. Geisler, Verlag Stahleisen GmbH, ISBN 3-514-00734-9 (2006) 341-346.

31) Walther, F.; Eifler, D.:
Mechanische, thermische und elektrische Messverfahren zur Charakterisierung des Ermüdungsverhaltens metallischer Werkstoffe.
Werkstoffprüfung - Fortschritte der Kennwertermittlung für Forschung und Praxis, Hrsg.: Borsutzki, M.; Geisler, S.; Verlag Stahleisen GmbH, ISBN 3-514-00734-9 (2006) 305-312.

30) Ebel-Wolf, B.; Walther, F.; Eifler, D.:
Microstructure-based characterization of the cyclic deformation behavior of the magnesium die-cast alloys MRI 153M and MRI 230D.
Magnesium - 7th International Conference on Magnesium alloys and their applications, Dresden, Hrsg.: K. U. Kainer, Wiley-VCH, ISBN 978-3-527-31764-6 (2006) 673-679.

29) Meilgen, C.; Walther, F.; Eifler, D.:
Laststeigerungsversuche zur Berechnung der Wöhlerkurve aktueller Radwerkstoffe.
Rad-Schiene 2006, 8. Internationale Schienenfahrzeugtagung, Dresden (2006) 36-38.

28) Walther, F.; Eifler, D.:
Lifetime calculation of railway wheel steels based on physical data.
Fracture of Nano and Engineering Materials and Structures, Proceedings 16th Eur. Conference of Fracture, Alexandroupolis, Greece, Ed.: Gdoutos, E. E.; Springer, ISBN 1-4020-4971-4 (2006) 1-8.

27) Starke, P.; Walther, F.; Eifler, D.:
PHYBAL - A new method for lifetime prediction based on strain, temperature and electrical measurements.
International Journal of Fatigue 28, 9 (2006) 1028-1036. https://doi.org/10.1016/j.ijfatigue.2005.07.050

26) Starke, P.; Walther, F.; Eifler, D.:
Lifetime calculation of cyclically loaded steel parts for traffic systems.
JIP 2006, International Conference Residual Fatigue Life and Life Time Extension of In-Service Structures, Paris, Frankreich (2006) 259-266.

25) Walther, F.; Eifler, D.:
Fatigue assessment of railway wheel steels under single step and random loading.
Fatigue 2006, 9th International Fatigue Congress, Atlanta, USA, Elsevier (2006) 1-10.

24) Ebel-Wolf, B.; Walther, F.; Eifler, D.:
Charakterisierung des Wechselverformungsverhaltens der Magnesium-Gusslegierungen MRI 153M und MRI 230D.
Werkstoffprüfung - Herausforderungen neuer Werkstoffe an die Forschung und Werkstoffprüfung, Hrsg.: Grellmann, W.; DVM-Bericht 641, ISSN 1861-8154 (2005) 239-244.

23) Starke, P.; Walther, F.; Eifler, D.:
Lebensdauerbewertung für Werkstoffe der Verkehrstechnik auf der Basis physikalischer Messgrößen.
Werkstoffprüfung - Herausforderungen neuer Werkstoffe an die Forschung und Werkstoffprüfung, Hrsg.: Grellmann, W.; DVM-Bericht 641, ISSN 1861-8154 (2005) 213-218.

22) Warnecke, G.; Eifler, D.; Aurich, J.C.; Mauren, F.; Klein, M.:
Investigation of interactions within manufacturing process chains.
Production Engineering - Research and Development in Germany, Vol. XII, 1 (2005) 85-90.

21) Ebel-Wolf, B.; Walther, F.; Eifler, D.:
Microstructure and cyclic deformation behaviour of the magnesium die-cast alloy AZ91D hp.
Materialprüfung 47, 7-8 (2005) 462-467.

20) Walther, F.; Eifler, D.; Mosler, U.; Martin, U.:
Deformation behaviour and microscopic investigations of cyclically loaded railway wheels and tires.
Zeitschrift für Metallkunde 96, 7 (2005) 753-760.

19) Starke, P.; Walther, F.; Eifler, D.:
Physikalisch-basierte Lebensdauerbewertung betriebsnah beanspruchter Werkstoffe der Verkehrstechnik.
ZF-ERFA-Tag 2005 des DVM-AK Betriebsfestigkeit, Diepholz (2005) 1-8.

18) Walther, F.; Eifler, D.:
Microstructure-based evaluation of the fatigue behaviour of railway wheel steels.
ICF 11, 11th International Conference on Fracture, Turin, Italy, 3944 (2005) 1-6.

 

2003 - 2004

17) Walther, F.; Eifler, D.:
Local cyclic deformation behavior and microstructure of railway wheel materials.
Materials Science and Engineering A 387-389 (2004) 481-485. https://doi.org/10.1016/j.msea.2004.05.034

16) Walther, F.; Eifler, D.:
Bewertung zyklischer Verformungsvorgänge in Eisenbahn-Radstählen mit Hilfe von Widerstandsmessungen.
Werkstoffprüfung 2004 - Konstruktion, Qualitätssicherung und Schadensanalyse, Hrsg.: Pohl, M.; Werkstoff-Informationsgesellschaft, ISBN 3-88355-337-9 (2004) 169-174.

15) Ebel-Wolf, B.; Walther, F.; Eifler, D.:
Charakterisierung des Wechselverformungsverhaltens der Magnesiumlegierung AZ91D.
Leichtbau und Betriebsfestigkeit, 31. Tagung des DVM-AK Betriebsfestigkeit, München, DVM-Bericht 131, ISSN 0944-5242 (2004) 241-250.

14) Walther, F.; Eifler, D.:
Interrelation of the microstructure and the fatigue behavior of railway wheels at ambient and elevated temperatures.
LCF 5, 5th International Conference on Low Cycle Fatigue, Berlin, Hrsg.: P.D. Portella, H. Sehitoglu, K. Hatanaka (2004) 15-20.

13) Schwilling, B.; Fleck, C.; Walther, F.; Eifler, D.:
Cyclic deformation behavior of Ti-6Al-4V and Ti-6Al-7Nb in different quasi-physiological media.
Ti-2003, Science and Technology, 10th World Conference on Titanium, Hamburg, Hrsg.: G. Lütjering, J. Albrecht, Vol. I-V, Wiley-VCH, ISBN 3-527-30306-5 (2004) 3237-3244.

12) Walther, F.; Meilgen, C.; Eifler, D.:
Mikrostrukturbasierte Ermüdungseigenschaften hochbeanspruchter UIC-Radwerkstoffe.
Eisenbahningenieur 55, 5 (2004) 41-48.

11) Walther, F.; Eifler, D.:
Fatigue behaviour of railway wheels at different temperatures.
Materialprüfung 46, 4 (2004) 158-162.

10) Schelp, M.; Starke, P.; Walther, F.; Eifler, D.:
Lebensdauerberechnung auf der Basis von σ,ε-, σ,T- und σ,R-Messungen.
Abschlusskolloquium des DFG SPP 1036 „Mechanismenorientierte Lebensdauervorhersage für zyklisch beanspruchte metallische Werkstoffe“, DVM, Bremen (2004) 83-90.

9) Meilgen, C.; Walther, F.; Eifler, D.:
Ermüdungseigenschaften aktueller UIC-Radwerkstoffe.
Rad-Schiene 2003, 6. Internationale Schienenfahrzeugtagung, Dresden (2003) 51-53.

8) Nebel, T.; Walther, F.; Dobmann, G.; Eifler, D.:
Application of Giant-Magneto-Resistance-sensors for the characterization of the cyclic deformation behavior of steel.
ATEM'03, International Conference on Advanced Technology in Experimental Mechanics, Nagoya, Japan (2003) 1-6.

7) Wagner, G.; Walther, F.; Nebel, T.; Eifler, D.:
Glass/glass-joints by ultrasonic welding.
Glass Technology 44, 4 (2003) 152-155.

6) Walther, F.; Eifler, D.:
Bewertung des Ermüdungsverhaltens von Radstählen anhand von Dehnungs-, Temperatur- und Widerstandsmessungen.
Zeitschrift für Metallkunde 94, 5 (2003) 505-510.

 

1998 - 2002

5) Walther, F.; Eifler, D.:
Local dependence of the fatigue behavior of highly stressed wheel materials.
7. Tagung Gefüge und Bruch, Leoben, Österreich (2002) 29-35.

4) Poschmann, I.; Walther, F.; Eifler, D.:
Fatigue behavior of UIC-standardized wheel and tire steels.
IWC 13, 13th International Wheelset Congress, Rom, Italy (2001) 1-8.

3) Walther, F.; Eifler, D.:
Microstructure and cyclic deformation behavior of wheel and tire steels in technical relevant heat treatments.
Zeitschrift für Metallkunde 92, 8 (2001) 882-887.

2) Walther, F.; Eifler, D.:
Influence of the local microstructure on the cyclic deformation behavior of wheel and tire steel.
Materials Week, International Congress on Advanced Materials, their Processes and Applications, München (2000) 1-8.

1) Nebel, T.; Walther, F.; Bassler, H.-J.; Eifler, D.:
Einfluss von Mittelbeanspruchungen auf das Wechselverformungsverhalten und die verformungsinduzierte Martensitbildung des Stahls X6CrNiTi1810.
Materialwissenschaft und Werkstofftechnik 29, 11 (1998) 662-669.